摘要
本文针对雷达杂波抑制中常用的时变级联滤波器,提出了两种实用的设计方法。第一种方法通过时变级联滤波器与时变非级联滤波器的等效来设计时变级联滤波器。该方法可以使时变级联滤波器具有最佳杂波滤波器的效果。第二种方法通过对总的等效滤波器的设计来得到级联滤波器第二级的权系数。分析表明,时变级联滤波器第二级的频率响应很难写出,但可以通过总的等效频率响应来体现。
Two approaches to the design of the time-varying cascaded filters used in radar clutter rejection are presented. In the first approach, by fitting the cascaded filter to the noncascaded filter, the time-varying cascaded filter can be designed, which makes it possible that the time-varying cascaded filter behaves just like an optimum clutter filter. The second approach can be used to design the second-stage filter in a time-varying cascaded one by setting zeros in its equivalent overall frequency response. It has been shown that the frequency response of the second-stage filter in the time-varying cascaded filter is difficult to express, however, is convenient to be involved in the overall response.
关键词
时变滤波器
级联滤波器
设计
Time-varying filter, Clutter rejection, Radar signal processing
