摘要
人工繁殖毛百合主要用鳞片扦插，扦插选用的鳞片与其重量有关，与其着生位置无关，通常选用不小于０．２ｇ的新鲜鳞片扦插成活效果好。扦插的简便方法的将鳞片与砂或腐殖土按１：２（或大于１：２）混合，装入塑料袋并封口，使其内土壤含水量保持在３０％左右为佳，扦插所需温度为１０～３０℃，但以２５℃恒温最适宜，１５～２０℃次之，扦插季节以春季最佳。
Scale cutting is tile main method used in the artificial propagation of Lilium dauricum.The scales selected for cutting are related to their weight.but irrelevent to their position in bulbs.Generally.good results are obtained when frech scales heavier than 0.2g are selected for cutting.A simple and convenient method of cutting is to mix the scales and sand or humus(leaf)soil in a ratio of 1:2(or greater than 1:2)and to put them in plastic bags,then the bags are sealed in order to maintain the moisture content at about 30%. The intended temperature was 10～30℃.with a constant temperature at 25℃ as the best.15～20℃ as the next.The best season of cutting is spring.
出处
《东北林业大学学报》
CAS
CSCD
北大核心
1994年第6期18-23,共6页
Journal of Northeast Forestry University
基金
黑龙江省自然科学基金
关键词
毛百合
扦插繁殖
环境因子
生物学
Lilium dauricum
Cutting propagation
Environmental factors
