摘要
本文测试并分析了中密度纤维板的弯曲载荷变形情况。试验结果表明:中密度纤维板弯曲载荷变形曲线的比例阶段基本在最大载荷的1/3或1/2之内,而影响弹性模量的主要因素是比例极限内的斜率。同时对弹性模量的测试方法提出建议。
In this paper,the bending load-deformation of medium
density fibreboard was tested and analysed.The experimental results indicated that the
proportional stage of bending load-defor-mation curve of medium density fibreboard was basically
within l/3 or l/2 of the maximum load while the main factor affecting elastic modulus was the slope
within proportional limits.Meanwhile several suggestions on the test method for elastic
modulus were put forward。
出处
《福建林业科技》
1994年第4期46-49,共4页
Journal of Fujian Forestry Science and Technology
关键词
弹性模量
测试方法
硬质纤维板
Medium density fibreboard
elastic modulus
test method