摘要
钒钛高锰钢中碳化物的研究徐志明（阜新矿业学院）１前言钒钛高锰钢的耐磨机理研究已有报道，但对于钒钛碳化物、碳氮化物的成分和结构及钒钛合金元素的分布报道甚少。本文重点探讨钒钛高锰钢中碳氮化物的类型、形状、大小、数量及钒和钛的分布，以期为高锰钢的开发应用提...
The microalloyin g M13 with V and Ti,and precipitation heat treatment arestudied in the present paper.The result shows that a iot of regular V、Ti inclusions isfound in the as casting. There is no obvious effect of heat treatment on the type,shape size,quantity and distribution of inclusions,however, through precipitation heat treatmentfor Mn13 steel microalloyed,the dispersive nitrocarbide of V、Ti are obtained。Therefore,the wear resistance of the steel is increased.
关键词
合金钢
显微组织
高锰钢
碳化物
V-Ti alloyed high manganese steel,microalloying,precipitating heat treatment,nitrocarbide
