期刊文献+

GH2871合金的研制及其组织与性能 被引量:4

THE DEVELOPMENT OF ALLOY GH2871 AND ITS STRUCTURE AND PROPERTIES
下载PDF
导出
摘要 介绍了一种含0.5%左右Nb和1%左右W的15Cr-25Ni-2Ti-1.5Mo铁基高温合金(GH2871合金)的研制及其组织与性能。结果表明:由于Nb、W、Mo等高熔点低自扩散系数的组分进入了该合金MC、γ′相,改善了组织、增加了γ′相的数量和提高其稳定性,起到了良好的强韧化作用,从而大幅度提高了持久寿命和疲劳强度。与国内外同类合金相比,该合金具有更好的综合性能。 An iron-base superalloy 15Cr-25Ni-2Ti-l. 5Mo(alloy GH2871),which contains about 0. 5% Nb and l%W,has been developed and its structure and properties are investigated in this paper. The results show that the stress rupture life and fatigue strength are improved on large scale because alloying elements Nb,W,Mo,whose melting-point are higher and self-diffusion coefficient are lower, enter MC and r' phase to ameliorate structure and make r' phase increase in amount and stability, strengthening and toughening the alloy well. Compared with the same kind alloys at home and abroad,this alloy shows better combined properties.
出处 《理化检验(物理分册)》 CAS 1994年第1期24-27,共4页 Physical Testing and Chemical Analysis(Part A:Physical Testing)
关键词 GH2871合金 强韧化 耐热合金 Nb, W, Alloy GH2871, Strengthen and toughen
  • 相关文献

参考文献1

二级参考文献2

  • 1吴云书,现代工程合金,1983年
  • 2团体著者,GH132合金,1980年

共引文献10

同被引文献27

  • 1李玉清,陈国胜,伍伯华,周乐澄.13Cr-30Ni合金中γ’相的沉淀与强化[J].特殊钢,1993,14(2):20-23. 被引量:3
  • 2陈国胜,周乐澄,伍伯华,奚壮行,史新民,张赫瞳.铁基高温合金GH2871成分对组织和性能的影响[J].特殊钢,1994,15(6):63-69. 被引量:4
  • 3侯介山,郭建亭,周兰章,叶恒强.K44镍基高温合金长期时效过程中γ′相粗化对拉伸性能的影响[J].金属学报,2006,42(5):481-486. 被引量:17
  • 4刘致远,王维国,喇培清,曾丽,薛辉军,郝远.Al改性HP40合金力学性能的研究[J].热加工工艺,2007,36(12):15-17. 被引量:6
  • 5[美]美国金属学会.金属手册(9版)第3卷[M].北京:机械工业出版社.1991:339.
  • 6Li C S , Yang Y S. A glass based coating for enhancing anti-coking and anti-carburizing abilities of heat-resistant steel HP [J]. Surface & Coatings Technology, 2004, 185: 68-73.
  • 7Benum, Leslie Wilfred, Oballa, et al. Process of treating a stainless steel matrix[P]. USP6436202, 20th August, 2002.
  • 8Liu Zhiyuan, Zeng Li and La Peiqing. Effect of aluminum on microstructure of HP40 steel [J]. Journal of Iron and Steel Research (International), 2007, 14: 273-277.
  • 9Lee D, Santella M L.Thermal aging effects on the mechanical properties of as-cast Ni3Al-based alloy [J]. Materials Seienee and Engineering, 2006, A428: 196-204.
  • 10Morimoto H, Tanaka T, Yurioka N, et al. Welding Consumables and Mechanical Properties of Weldments for 9Cr-1.8W steel for USC Boiler Piping and Tubing Applications. CSPE-JSME-ASME International Conference on Power Engineer-ing-95[C]. Shanghai: Chinese soc

引证文献4

二级引证文献6

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部