期刊文献+

应大力提倡高孔密射孔完井 被引量:2

THE HIGH DENSITY COMPLETION TECHNOLOGY SHOULD BE ENERGETICALLY ENCOURAGED
下载PDF
导出
摘要 本文论述了射孔密度对油气并产能的影响,介绍了国外高孔窑射孔的倾向和国内目前的射孔现状.并根据国内外有关射孔对套管损害的理论研究和模拟试验结果,提出大力提倡高孔密射孔的必要性和可行性。 ? This paper discusses the influence of perforating density tothe production of a oil or gas well,thedeveloping tendency of high density perforation at abroad,and the existing state of perforation at home ,According to the theoretical studies and simulating test results about the perforating damage to casing at home and abroad,it introduces the necessity and feasibilty to recommend the high density perforation technolgy
作者 潘迎德
机构地区 西南石油学院
出处 《石油钻采工艺》 CAS CSCD 北大核心 1994年第1期51-59,共9页 Oil Drilling & Production Technology
  • 相关文献

参考文献3

二级参考文献3

  • 1唐愉拉,石油学报,1989年,3期
  • 2朱桂清,射孔技术译文集,1989年
  • 3孙艾茵,石油钻采工艺,1988年,6期

共引文献34

同被引文献45

  • 1杨其彬,马利成,黄侠.复合压裂技术[J].断块油气田,2004,11(1):74-76. 被引量:19
  • 2冯跃平,熊友明.射孔完井研究现状及展望[J].钻采工艺,1989,12(1):34-36. 被引量:1
  • 3袁吉诚.射孔新产品新技术及其应用[J].天然气工业,1996,16(5):49-52. 被引量:3
  • 4贝尔WT 郝志文(译).射孔[M].北京:石油工业出版社,1986..
  • 5OLSON Jon E. Fracturing from highly deviated and horizontal wells: numerical analysis of non-planar fracture propagation[R]. SPE 29573, 1995.
  • 6HAINEY B W, WENG X, STOISITS R F. Mitigation of multiple fractures from deviated wellbores[ R]. SPE30482, 1995.
  • 7CROSBY D G, RAHMAN M M, RAHMAN M K, et al. Single and multiple transverse fracture initiation from horizontal wells[J]. Journal of Petroleum Science and Engineering,2002(35) : 191 - 204.
  • 8MORALES R H, BRADY B H. Three-dimensional analysis and visualtion of the welllxxe and the fracturing process in inclined wells[R]. SPE 25889, 1993.
  • 9MANRIQUE J F, VENKITARAMAN A. Oriented fracturing-a pmctlcal technique for production optimization[R]. SPE 71652, 2001.
  • 10MOHAMED Soliman, RICHARD Dupond, KENT Folse.Use of oriented perforation and new gun system optimize fracturing of high permeability, unconsolidated formations[R]. SPE 53793, 1999.

引证文献2

二级引证文献22

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部