摘要
通过对天津钢管公司从德国引进的4流弧形圆坯连铸机二冷系统的分析研究,探讨了该系统在软件和硬件设计方面存在着的部分不合理之处,并相应提出了改进、完善该系统的远期与近期二套设想。
出处
《天津冶金》
CAS
1994年第4期10-13,共4页
Tianjin Metallurgy
参考文献1
-
1陈家祥.连续铸钢手册[M]冶金工业出版社,1991.
同被引文献12
-
1朱立光,周建宏,王硕明,王迎春,李建新,刘战玲.基于目标温度的方坯连铸二冷配水方案优化[J].炼钢,2006,22(2):34-38. 被引量:18
-
2陶文栓.数值传热学[M].西安:西安交通大学出版社,1995.
-
3B. G. Thomas, Brimacombe Lecture. Modeling of the Continuous Casting of Steel Past, Present and Future I J]. 59th Electric Furnace Conf., Pheonix, AZ, 2001, Iron and Steel Soc., PP: 3-30.
-
4Lee Jung-Eui, Han Heung Nam, OH Kyu Hwan and Yoon Jong-Kyu, A fully coupled analysis of fluid flow, heat transfer and stress in continuous round billet cast- ing[J]. ISIJ International, 1999, 39(5) : 435.
-
5Mizikar E A. Mathematical heat transfer model for So- lidification of CC Steel Slab [J]. Trans. Met. SOC. A1ME. 1967, 239: 1747-1753.
-
6Uehara M, Samarasekera I V, Brimacombe J K. Math- ematics Modelling of Unbending of Continuously CastSteel Slab [J]. lronmaking&Steelmaking, 1986, 13 (3) : 138-153.
-
7张克强.连铸二冷区铸坯表面温度及配水研究[J].钢铁,2000,(9):23-26.
-
8F. R. Camisani-Calzolari, I. K. Craig and P. C. Pistorius. Speed Disturbance Compenation in the Sec- ondary Cooling Zone in Continuous Casting[J]. ISIJ, 2000, 40(5) : 469-477.
-
9L. K. Chiang. Secondary Spray Cooling Study in the Continuous Casting of Stainless Steel Slabs[ C]. Elec- tric Furnace Conference Proceedings, 1999: 653-669.
-
10Hongming WANG, Guirong LI, Yucheng LEI. Mathe- matical Heat Transfer Model Research for the Improve- ment of Continuous Casting Slab Temperature[ J]. ISIJ International, 2005, 45(9) : 1291-1296.
-
1桂森,阎俊生.合金钢小方坯连铸机达产效的实践[J].重庆特钢,1994(2):1-5.
-
2吕建华.第三炼钢厂小方坯连铸机自动化系统及其发展方向[J].首钢科技,1994(6):34-38.
-
3边德让.水平连铸机[J].特殊钢,1994,15(6):85-89. 被引量:1
-
4王振样,姚家华,张春峰.φ210mm断面圆坯结晶器保护渣的探讨[J].天津冶金,2001(1):34-36. 被引量:1
-
5曹远锋,史济春.方坯铸机二冷区配水制度研究[J].冶金丛刊,1993(5):30-36.
-
6杜素周.邯钢矩坯连铸机拉坯力的确定[J].河北冶金,1994(3):30-32.
-
7刘素健.Ca处理钢用镁-尖晶石质滑板的开发[J].国外耐火材料,1995,20(11):57-58. 被引量:3
-
8刘洪岭.天津钢管公司直接还原厂工厂设计[J].炼铁,1996,15(4):13-18.
-
9罗文.圆坯连铸机二流改三流的实施[J].冶金设备管理与维修,2003,21(5):20-20.
-
10韩俊.安钢方圆坯连铸机设计特点和生产实践[J].连铸,2016,41(2):48-51. 被引量:2