期刊文献+

汽车空气滤清器前进气管的雨水分离率计算分析 被引量:2

Computation and Analysis of Rain Separating Rate in the Front Intake Pipe of Air Cleaner
下载PDF
导出
摘要 对某国产新型载货汽车的空气滤清器前进气管进行了流场几何建模,并利用流体分析软件Star-CD对两相流场进行了数值计算,最终得到了在特定行驶工况下前进气管的雨水分离率为85.81%.同时针对不同的隔栅角度进行了计算,分析了隔栅角度对雨水分离率的影响.结果表明隔栅角取25°~32°为宜. A geometrical model of the front intake pipe of air cleaner for a new domestic truck was presented, and then the numerical computation of two-phase flow using the software Star-CD was performed, and the rain separating rate of the front intake pipe was 85.81% which attained in special running condition. According to the calculations of different fence angles, the influence of fence angle on the rain separating rate was analyzed. The result shows that fence angle ranges between 25°and 32°. The analysis has much effect on the optimized design of intake pipe.
出处 《吉林大学学报(工学版)》 EI CAS CSCD 北大核心 2005年第2期127-130,共4页 Journal of Jilin University:Engineering and Technology Edition
关键词 流体传动与控制 空气滤清器 雨水分离率 流体分析 hydraulic transimission and control air cleaner rain separating rate fluid analysis
  • 相关文献

参考文献9

  • 1陈家瑞.汽车构造(上册)[M].北京:机械工业出版社,2000..
  • 2陈庆樟.空气滤清器的使用与保养[J].农机使用与维修,2003(1):17-17. 被引量:1
  • 3YAO Sheng-hong. Two Dimensional Backward Fac-ing Single Step Flow Preceding an Automotive Air-Filter[D].U.S.A.: Oklahoma State University,2000.
  • 4董敬 庄志 常思勤.汽车拖拉机发动机(第三版)[M].北京:机械工业出版社,2000..
  • 5张也影.流体力学(第二版)[M].北京:高等教育出版社,2002..
  • 6田华,葛安林,马文星,张作礼.液力变矩器流场损失的分析[J].吉林大学学报(工学版),2004,34(4):559-563. 被引量:9
  • 7EDINILSON Alves Costa. CFD Approach on Underhood Thermal Management of Passenger Cars and Trucks[C]∥SAE2003-01-3577.
  • 8LUIZ Morgado. Use of CFD to Support Heat Management CAE Simulation[C]∥SAE2003-01-3559.
  • 9JOSE Carlos Senna. The Development of a New Tailcone for a Regional Aircraft: A Multidiscipli-nary Approach[C]∥SAE2003-01-3531.

二级参考文献8

  • 1田华,葛安林,马文星,张作礼.液力变矩器泵轮内流场的数值分析[J].吉林大学学报(工学版),2004,34(3):378-382. 被引量:24
  • 2BY R R, KUNZ R. LAKSHMINARAYANA B. Navier-stokes analysis of the pump flow field of an automotive torque converter[J]. ASME, 1995,117:116-122.
  • 3DONG Y, LAKSHMINARAYANA B, MADDOCK D. Steady and unsteady flow field at pump and turbine exits of a torque converter[J]. ASME, 1998,120:538-548.
  • 4DONG Y, LAKSHMINARAYANA B. Rotating probe measurements of the pump passage flow field in an automotive torque converter[J]. ASME, 2001,123:81-91.
  • 5DONG Y, LAKSHMINARAYANA B. Experimental investigation of the flow field in an automotive torque converter stator[J]. ASME, 1999,121:788-797.
  • 6EJIRI E, KUBO M. Performance analysis of automotive torque converter elements[J]. ASME, 1999,121:266-275.
  • 7DENTON J D. The calculation of three-dimensional viscous flow through multistage turbomachines[C]∥ASME Paper 90-GT-19.
  • 8KLAUS Brun, RONALD D Flack. The flow field inside an automotive torque converter: laser velocimeter measurements[C]∥SAE 960721.

共引文献20

同被引文献1

引证文献2

二级引证文献1

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部