摘要
为了补偿由于各种因素引起的微波相位漂移 ,BEPCⅡ直线加速器需要建立微波相位反馈控制系统 .能量最大法将用来确定每台功率源的最佳相位 .沿直线加速器速调管长廊铺设相位稳定同轴线提供相位参考 .现在已经完成了关键部件 ,如PAD单元、IA单元的开发 .搭建了相控最小系统对系统进行了验证 .
In order to compensate the RF phase drift due to various factors, we will establish a RF phasing system for BEPCⅡ linac. Energy maximizing method will be used to determine the RF phase of each RF power source. A coaxial line will be used to distribute RF phase reference along the klystron gallery. The key components, such as PAD unit, IA units, have been developed. A minimum phasing system is established and runs successfully.
出处
《高能物理与核物理》
CSCD
北大核心
2005年第3期316-320,共5页
High Energy Physics and Nuclear Physics
基金
BEPCⅡ工程资助~~
关键词
BEPCⅡ
直线加速器
微波相位
反馈控制
系统设计
linear accelerator, phasing system, low level RF system, RF phase measurement, I/Q demodulator