期刊文献+

Cu-Ni-Si合金时效早期动力学研究 被引量:19

Study on early aging stage kinetics in a CuNiSi alloy
下载PDF
导出
摘要 通过对固溶态 Cu-Ni-Si合金时效时电阻变化规律的分析,研究了合金时效早期的析出行为,并借助透射电镜观察合金时效析出相的组织形态。根据Avrami 经验公式导出了合金在一定温度下时效的Avrami相变动力学经验方程,在此基础上计算出合金在不同温度下时效的相变开始时间。 By analysing the electric resistance variation of the solid solution Cu-Ni-Si alloy in the process of aging, precipitation behavior of the early aging stage was studied. The morphology of precipitates was observed by means of transmission electron microscope. Then, the transformation kinetics equation was educed from the Avrami empirical formula, on the basis of this equation, transformation kinetics curve can be drawn and the time for starting transformation can be calculated at different aging temperatures.
出处 《功能材料》 EI CAS CSCD 北大核心 2005年第3期368-370,共3页 Journal of Functional Materials
基金 国家高技术研究发展计划(863计划)资助项目(2002AA331112) 河南省重大科技攻关资助项目(0122021300)
关键词 CU-NI-SI合金 时效 电阻率 体积分数:相变动力学 Aging of materials Electric conductivity Electric resistance Kinetic theory Mathematical models Nickel alloys Phase transitions Solid solutions
  • 相关文献

参考文献4

二级参考文献16

  • 1二冢练成.Development of copper alloy for leadframe[J].伸铜技术研究会志,1997,36(1):25-32.
  • 2曹育文.引线框架用高强高导铜合金研究[M].北京:清华大学,1999.57-66.
  • 3铃木竹四.The characteristics and processes in Cu-Ni-Si alloy heat treatment[J].伸铜技术研究会志,1994,33(1):152-160.
  • 4[1]Rensei F.Rensei Futatsuka development of copper alloy for leadframe [J].Journal of the Japan Copper and Brass Research Association,1997,36: 25-32.
  • 5[2]Naotsugu I.Behavor of pricipitation and recrystallization affect upon texture of Cu-Cr-Zr alloy [J].Journal of the Japan Copper and Brass Research Association,1993,32: 115-121.
  • 6[3]Motohisa M.High-strength and high-conductivity alloy KLF201 [J].Journal of the Japan Copper and Brass Research Association,1988,27: 93-98.
  • 7[4]Motohisa M.Development trends in new copper alloy for lead-frame [J].Journal of the Japan Copper and Brass Research Association,1990,29: 18-21.
  • 8[5]Motohisa M.Poformence of KFC-SH and KLF194-SHT copper alloys in high-strength and high-conductivity for lead frame [J].Journal of the Japan Copper and Brass Research Association,1990,29: 224-233.
  • 9[7]Hiroshi Y.Cu-Fe-Ti-Mg alloy used in electronical material [J].Journal of the Japan Copper and Brass Research Association,1984,23: 109-115.
  • 10[8]CEN Shu-chuan(陈树).Physical Property of Material(材料物理性能) [M].Shanghai: Shanghai Jiaotong University Press,1999.40.

共引文献274

同被引文献156

引证文献19

二级引证文献78

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部