期刊文献+

γ-TiAl基合金的室温拉伸性能与断裂韧度的关系 被引量:5

Relationship between Tensile Properties and Fracture Toughness in Room Temperature of γ-TiAl Alloys
下载PDF
导出
摘要 研究了γ-TiAl基合金的室温拉伸性能与断裂韧度随晶粒尺寸变化的关系。结果表明:晶粒尺寸较大的近全层组织的室温拉伸性能低于晶粒尺寸较小的双态组织的拉伸性能;然而前者的室温断裂韧度要高于后者的室温断裂韧度;拉伸性能与断裂韧度与晶粒尺寸变化而出现相反的变化规律是由于两种试验时断裂途径取样体积的不同所致。 Relationship between tensile properties and fracture toughness and their dependence on grain sizes of γ-TiAl alloys at room temperature was investigated. The results show that tensile properties of near fully lamellar microstructure with bigger grains were lower than those of duplex microstructure with smaller grains. However, fracture toughness of the fermer was higher than that of the latter. Inverse relationship between tensile properties and fracture toughness are explained by the difference in sampling volumes between tensile testing and toughness testing.
出处 《机械工程材料》 CAS CSCD 北大核心 2005年第3期18-21,共4页 Materials For Mechanical Engineering
基金 国家自然科学基金资助项目(59871015)
关键词 r-TiAl 晶粒尺寸 拉伸性能 断裂韧度 γ-TiAl grain size tensile property fracture toughness
  • 相关文献

参考文献11

  • 1梁益龙,雷旻,钟蜀辉,江山.板条马氏体钢的断裂韧性与缺口韧性、拉伸塑性的关系[J].金属学报,1998,34(9):950-958. 被引量:20
  • 2Yamaguchi M, Inui H, Ito K. High-temperature structural intermetallics[J]. Acta metal, 2000,48: 307- 322.
  • 3Kim Y W, Froes F H. In High-temperature alurninides and intermetallics[A]. TMS[C]. Warreddate, PA: 1990. 465-492.
  • 4Larsen J M, Williams K A, Balsone S J, et al. In high-temperature aluminides and intermeallics[A]. TMS[C]. Warreddate, PA:1990. 521-556.
  • 5Tsujimoto T, Hashimoto K. In high-temperature ordered intermetallic alloys Ⅲ [A]. MRS[C]. Pittsburgh, PA: 1989.391 -396.
  • 6Kim Y W. In high-temperature ordered intermetallic alloys Ⅳ [A]. MRS[C]. Pittsburgh, PA:1991. 777-794.
  • 7Huang S C, Hall E L. In high-temperature ordered intermetallic alloys Ⅲ[A].MRS[C]. Pittsburgh, PA: 1989. 373-383.
  • 8Chen J H, Cao R, Wang G Z, et al. Study on notch fracture of TiAl alloys at room temperature[J]. Metall Mater Trans A, 2004,35A(2): 439-456.
  • 9Chan K S, Onstott J, Kumar K S. The fracture resistance of a binary TiAl alloy[J]. Metall Trans A, 2000,31A: 71 - 80.
  • 10Kim Y W, Dimiduk D M, George R. Irwin symposium oncleavage fracture[A]. The Minerals, Metals & Materials Societv[C]. 1997. 305-317.

二级参考文献8

  • 1林吉忠,金属材料的断裂与疲劳,1989年,156页
  • 2Cao Weidi,Metall Trans,1987年,18卷,1569页
  • 3Lee S,Metall Trans,1985年,16卷,1633页
  • 4刘禹门,机械工程学报,1985年,21卷,27页
  • 5Lai G Y,Metall Trans,1974年,5卷,1663页
  • 6邓增杰,工程材料的断裂与疲劳,1995年,32,22页
  • 7梁益龙,理化检验.物理分册,1993年,29卷,10期,11页
  • 8石德珂,西安交通大学学报,1989年,23卷,增2期,194页

共引文献19

同被引文献51

引证文献5

二级引证文献29

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部