摘要
采用误差补偿技术是提高机床加工精度的一个重要发展趋势,文中对机床的热变形误差状况和误差补偿技术进行了讨论。对误差补偿技术的研究和应用现状、关键技术、应用过程中存在的问题以及将来的发展趋势作了详细的分析和介绍。
出处
《机电技术》
2004年第2期64-67,共4页
Mechanical & Electrical Technology
参考文献12
-
1[1]R.Ramesh.Error Compensation in Machine Tools-A Review Part Ⅱ :Thermal Errors [J].International Journal of Machine Tools and manufacture,2000,40:1257-1284.
-
2[2]P.S.Huang.On-line Error Compensation of Coordinate Measuring Machines [J].International Journal of Machine Tools and Manufacture,1995,35 ( 5 ):725-738.
-
3[3]R.Ramesh.Error Compensation in Machine Tools-A Review Part Ⅰ:Geometric,Cutting-iorce Induced and Fixture-dependent Errors [J].International Journal of Machine Tools and Manufacture,2000,40:1235-1256.
-
4杨庆东,Van Den Bergh C,Venherck P,KruthJP.神经网络补偿机床热变形误差的机器学习技术[J].机械工程学报,2000,36(1):92-95. 被引量:15
-
5张志飞,刘又午,张永丹,章青.加工中心热误差补偿研究[J].制造技术与机床,2001(1):27-29. 被引量:3
-
6[6]M.H.Attia .Thermometric Design Considerations for Temperature Monitoring in Machine Tools and CMM Structures [J].The International Journal of Advanced Manufacturing Technology,1993,8:311-319.
-
7[7]M.Weck .Compensation of Thermal Errors in Machine Tools with Minimum Number of Temperature Probes Based on Neural Network [J].ASME,1998,64:735-743.
-
8[8]S.K.Kim.Real-time Estimation of Temperature Distribution inABall-screw System [J].International Journal of Machine ToolsandManufacture,1997,37 (4):451-464.
-
9[9]J.S.Chen.Fast Calibration and Modelling of Thermally Induced Machine Tool Errors in Real Machining [J].International Journal of Machine Tools and Manufacture,1997,37 ( 2 ):159-169.
-
10[10]D.A.Krulewich .Temperature Integrated Model and Measurement Point Selection for Thermally Induced Machine Tool Errors [J].Mechatronics,1998,8:395-412.
二级参考文献7
-
1Bryan J.Intemahonal statUs of thermal error researeh[].KeynotePaper Annals of the CIRP.1990
-
2Veldhuis S C,Elbestawi M A.Modeling and compensahon forfivesaxis machine tool ermrs[].Manufacturing Science andEngineering ASME.1994
-
3Week M.Reduchon and compensation of thermal ermrs inmachine tools[].Annals of CIRP.1995
-
4Week M,Hemest U.Compensahon of thermal errors in machinetools with minimum number of temperabe Probes based onneural network[].American Society of Mechanical Engineers.1998
-
5Nunin M.Learning approaches to rohahcs and manufacturing:[ Doctoral Dissertation ][]..1998
-
6章青,王国锋,刘又午,赵宏林,盛伯浩.数控机床误差补偿技术及应用——几何误差补偿技术[J].制造技术与机床,1999(1):30-31. 被引量:23
-
7章青,赵宏林,唐华,盛伯浩.数控机床误差补偿技术及应用热误差补偿技术[J].制造技术与机床,1999(3):26-28. 被引量:17
共引文献16
-
1傅建中,陈子辰.精密机械热动态误差模糊神经网络建模研究[J].浙江大学学报(工学版),2004,38(6):742-746. 被引量:37
-
2詹友基,乐清洪,贾敏忠.机床误差及其误差补偿技术[J].福建工程学院学报,2004,2(4):409-412. 被引量:5
-
3曹永洁,傅建中.基于高精度位移传感器的机床主轴热变形实时测量[J].组合机床与自动化加工技术,2006(12):42-44. 被引量:8
-
4郭前建,杨建国,李永祥,王秀山.滚齿机热误差补偿技术研究[J].中国机械工程,2007,18(23):2818-2821. 被引量:7
-
5于印民,刘文波.基于USB数据采集卡的高速电主轴轴向热伸长及径向振动数据采集系统的设计[J].组合机床与自动化加工技术,2009(1):54-57. 被引量:3
-
6汪样兴,王树林,张云峰,张建红.数控机床热误差灰色神经网络补偿应用研究[J].机械设计与制造,2014(7):236-239. 被引量:13
-
7张成新,高峰,李艳,赵柏涵,孟振华.基于分段拟合的机床大尺寸工作台热误差补偿模型[J].机械工程学报,2015,51(3):146-152. 被引量:20
-
8周杰,李小汝,罗范杰.基于FCM自适应模糊聚类的温度测点优化[J].制造技术与机床,2015(2):39-42. 被引量:4
-
9李玉光.基于装配的卧式加工中心精度建模与分析[J].机械设计,2016,33(2):95-99. 被引量:3
-
10屈力刚,刘洪侠,邢宇飞,李铭.机床热误差非线性组合预测模型研究[J].机床与液压,2021,49(1):42-46. 被引量:2
-
1潘剑雄.现代误差补偿技术在普通机床改造中的应用[J].杭州机械,1997(2):19-21.
-
2贾敏忠,詹友基.机床几何误差和运动误差及其误差补偿技术[J].机电技术,2004,27(2):77-80. 被引量:12
-
3王岩.数控机床误差补偿技术问题的探讨[J].科技致富向导,2014(15):277-277.
-
4裘家骝,杨景龙,杨小军,陈有琪.专家系统在机床加工中的应用[J].机床,1989(11):9-13.
-
5李光龙,陈秀梅.数控机床热误差的控制措施[J].机械工程师,2014(8):3-5. 被引量:2
-
6李书和,张奕群,张国雄.数控机床热误差的补偿[J].航空精密制造技术,1996,32(4):6-9. 被引量:3
-
7张炎辉.如何提高机床加工精度[J].中学课程辅导(教学研究),2014,8(33):203-203.
-
8陈越.稀土在铝及铝合金中的应用[J].上海有色金属,1998,19(3):136-141. 被引量:17
-
9王世民,刘炳运,范大鹏.精密磨床主轴回转误差补偿技术的研究[J].国防科技大学学报,1992,14(2):33-37.
-
10李书和,张奕群,杨世良,张国雄.加工中心热误差补偿的研究[J].制造技术与机床,1997(6):16-19. 被引量:5