期刊文献+

Parameters Relevant to Bubble Detachment when Gas-injecting into Polymer Melt Flow Field

Parameters Relevant to Bubble Detachment when Gas-injecting into Polymer Melt Flow Field
下载PDF
导出
摘要 The bubble deformation processes were reported when gas was injected into polyme r melt flow field in another paper, the experiments showed that the deformation was severely affected by the volume of the bubble, and in turn, for the different bubbles, several different deformation processes were presented d uring their movement along the flow channel. In addition, we could find that the magnitude of the bubble volume was dependent upon the pressure difference of th e gas injection pressure and the melt pressure. In this paper, more experimental conditions were changed to investigate the parameters relevant to the detachmen t of bubbles from the injection nozzle. The experimental results show that the p ressure difference, the melt flow velocity as well as the melt pressure were all critical for the parameters, such as the bubble detachment time, the maximum bu bble diameters and the magnitude of the bubble volume. The morphology changes of bubble were very large when the flow field was abruptly changed, and the situat ions were more complicated. The bubble deformation processes were reported when gas was injected into polyme r melt flow field in another paper, the experiments showed that the deformation was severely affected by the volume of the bubble, and in turn, for the different bubbles, several different deformation processes were presented d uring their movement along the flow channel. In addition, we could find that the magnitude of the bubble volume was dependent upon the pressure difference of th e gas injection pressure and the melt pressure. In this paper, more experimental conditions were changed to investigate the parameters relevant to the detachmen t of bubbles from the injection nozzle. The experimental results show that the p ressure difference, the melt flow velocity as well as the melt pressure were all critical for the parameters, such as the bubble detachment time, the maximum bu bble diameters and the magnitude of the bubble volume. The morphology changes of bubble were very large when the flow field was abruptly changed, and the situat ions were more complicated.
作者 陈再良
出处 《Journal of Wuhan University of Technology(Materials Science)》 SCIE EI CAS 2005年第1期68-71,共4页 武汉理工大学学报(材料科学英文版)
基金 Funded by the National Nature Science Foundation of China(No.19632004,No.10172074) the Research Foundation for the Doctor al Program of Higher Education of China (No.98056113) Guang dong Province Nature Science Foundation ( No. 980573, No.0401154)
关键词 BUBBLE MORPHOLOGY detachment time geometry parameters flow field bubble morphology detachment time geometry parameters flow field
  • 相关文献

参考文献9

  • 1Li Si-nian Ph D,Song Shou-zhi,Yu Tian-qing,Chen Hui-min,Zhang You-shou,Shen Jin-long.Properties and structure of magnesium matrix composite reinforced with CNTs[J].Journal of Wuhan University of Technology - Mater Sci Ed.2004(1)
  • 2Yucheng Peng,Mingcheng Guo,Lin Li,Kailin Li.Research of bubble shape and interfacial characteristics when CO2 is injected into HDPE melt[J].Journal of Materials Science Letters.2003(8)
  • 3M Favelukis,Z Tadmor,R Semiat.Bubble Growth in a Viscous Liquid in a Simple Shear Flow[].American Institute of Chemical Engineers Journal.1999
  • 4L Chen,X Wang,R Straff and K Blizard.Shear Stress Nucleation in Microcellular Foaming Process[].Polymer Engineering and Science.2002
  • 5Z L Chen.Analysis of Interfaual Mophology and Mation during Gos-injecting into Polymermelt: [Ph D thesis][].Changsha:South China University of Technology.2000
  • 6S G Shan,D S Gao,W Chen.The Layered-nanocomposite Film of Polymer Intercalation in V2 O5 Xerogel[].Journal of Wuhan University.2000
  • 7Y C Peng,M C Guo,L Li,K L Li.Research of Bubble Bhape and Interfacial Characteristics when CO2 Injected into HDPE Melt[].Journal of Materials Science Letters.2003
  • 8J A Biesenberger and S T Lee.A Fundamental Study of Polymer Melt Devolatilization: III More Experiments on Foam-enhanced DV, Polymer[].Polymer Engineering and Science.1987
  • 9S N Li,S Z Song,T Q Yu.Properties and Structure of Magnesium Matrix Composite Reinforced with CNTs[].Journal of Wuhan University.2004

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部