摘要
以伽玛测井解释含量确定铀矿储量时,矿石体重应该是天然状态下的体重,当矿心孔隙度较大而有部分失水,并存在表面大孔隙时,封蜡法所测得的体重系统偏小。对此,本文改进了测定方法,提出了修正方案,并以某矿床为例分析了产生表面孔隙的原因及修正后的具体结果。
When the uranium reserves is determined by interpreting uranium content using gammalogging, the ore gravity should be in the natural condition. If the ore-core has large porosityand is dewatered partially,large pore exists on the surface of the ore-core, the gravities determined by sealing-paraffin method are systematically lower. Thus,this paper has proposed acalibration method to improve the measurement and taking a deposit as an example,the reasons for the surface pore and the calibrated results are analysed.
出处
《铀矿地质》
CSCD
北大核心
1994年第4期238-241,256,共5页
Uranium Geology
关键词
铀矿床
储量
孔隙率
矿石
体重
Partial dewatering percentage, Surface porosity factor, The gravity by sealing paraffin method, The gravity by non-sealing paraffin method