期刊文献+

在0~660.323℃温区标准铂电阻温度计的两个二次偏差函数 被引量:3

Two Quadratic Deviation Functions for SPRT in the Range 0 ℃ to 660.323 ℃
下载PDF
导出
摘要 给出了在0~660 323℃温区标准铂电阻温度计(SPRT)的两个二次偏差函数:一个是由水三相点、锡凝固点和铝凝固点的检定值来确定;另一个由水三相点、锌凝固点和铝凝固点来确定。这两个二次偏差函数是ITS 90温标在0~660 323℃温区标准铂电阻温度计偏差函数的一个很好的近似。使用70支标准铂电阻温度计检验了这两个偏差函数,其误差一般不超过2 4mK,最大不超过4 7mK。 Two quadratic deviation functions for standard platinum resistance thermometer(SPRT) in the range 0 ℃ to 660.323 ℃ are described, one of them can be determined from the calibration values at the triple point of water and the freezing points of tin and aluminum, and the other can be determined from those at the triple point of water and the freezing points of zinc and aluminum. These two functions are very close approximate to the ITS-90 deviation function in the range 0 ℃ to 660.323 ℃. Seventy SPRTs had been used to check the functions and the errors were no more than 4.7 mK.
出处 《计量学报》 CSCD 北大核心 2005年第2期107-110,共4页 Acta Metrologica Sinica
关键词 标准铂电阻温度计 偏差函数 温区 ITS-90温标 水三相点 铝凝固点 锡凝固点 锌凝固点 Metrology Standard platinum resistance thermometer Deviation functions ITS-90
  • 相关文献

参考文献5

  • 1Preston-Thomas H. The International Temperature Scale of 1990 (ITS-90)[J]. Metrologia, 1990, 27:3 ~ 10.
  • 2凌善康 译.1990年国际温标补充资料[M].北京:中国计量出版社,1994.22.
  • 3Strauss G F. Investigation of the ITS-90 subrange inconsistencies for 25.5 Ω SPRTs [ A ]. Schooley J F.Temperature, its Measurement and Control in Science and Industry, Vol. 6, Part 1 [ C ]. New York: American Institute of Physics, 1992, 165 ~ 168.
  • 4Crovini L. The development of the ITS-90 interpolation equations for the platinum resistance thermometer [ A ].Schooley J F. Temperature, its Measurement and Control in Science and Industry, Vol. 6, Part 1 [ C ]. New York:American Institute of Physics, 1992, 144 ~ 147.
  • 5Kang Zhiru, et al. Study of the IIS-90 non-uniqueness for the standard platinum resistance thermometer in the sub-range 0 ℃ to 419.527 ℃[J]. Metrologia, 2002, 39: 127~133.

同被引文献8

引证文献3

二级引证文献12

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部