摘要
A 10Gb/s transmitter module containing an electroabsorption modulator monolithically integrated with a distributed feedback (DFB) semiconductor laser is fabricated using the identical epitaxial layer scheme.Gain-coupling mechanism is employed to improve the single mode yield of the DFB laser,while inductively coupled plasma dry etching technique is utilized to reduce the modulator capacitance.The integrated device exhibits a threshold current as low as 12mA and an extinction ratio over 15dB at -2V bias.The small signal modulation bandwidth is measured to be over 10GHz.The transmission experiment at 10Gb/s indicates a power penalty less than 1dB at a bit-error-rate of 10 -12 after transmission through 35km single mode fiber.
利用同一外延层集成工艺方法制作了10Gb/s电吸收调制器/分布反馈(DFB)半导体激光器单片集成光发射模块.在器件中引入增益耦合机制以提高单模成品率,并采用感应耦合等离子体干法刻蚀技术以降低调制器电容.集成器件阈值电流为12mA,在-2V偏置时的消光比为15dB,器件的小信号调制带宽超过10GHz.在10Gb/s 调制速率下经过35km单模光纤传输后,误码率为10-12时的功率代价小于1dB.
基金
国家自然科学基金(批准号:60223001,60244001,60290084)
国家高技术研究发展计划(批准号:2001AA312190和2002AA31119Z)
国家重点基础研究发展规划(批准号:G2000 03 6601)资助项目~~
