Semi-solid Pressing Bonding Strength between Steel and Cu-graphite Composite
被引量：1
Semi-solid Pressing Bonding Strength between Steel and Cu-graphite Composite
基金
This project was supported by the National Natural Science Foundation of China(No.50274047 and 50304001)
the Bejing Jiaotong University Foundation.
参考文献17
-
1B.Kenneth: Metal Base Composite Material, National Defense Industry Press, Beijing, 1982, 45.
-
2Peng ZHANG:J.Mater. Sci. Technol., 2001, 17(2), 224.
-
3Daren SUN: Trans. Nonferr. Metal Soc., 1998, 8(1), 142.
-
4Peng ZHAXG: J. Wuhan Univ. Technol. Mater. Sci. Ed.,2002, 17(3), 46.
-
5Huan ZHANG: Composite Bearing, Science Press, Beijing, 1996, 108. (in Chinese).
-
6J.R.Davis: Alumisum and Aluminum Alloys, ASM International. Publications, OH,1993. 156.
-
7Chengshou WANG: Bearing, Mechanical Industry Press,Beijing, 1986, 56. (in Chinese)
-
8Jiangsheng ZHE: The Welding of Copper and Copper Alloy, Chem stry Industry Press, Beijing, 1979, 9. (in Chinese).
-
9Shixian LI: Graphite, Chemistry Industry Press, Beijing,1991, 11. (in Chinese)
-
10M.L.Mackay: Metal Progress, 1997, (6), 32.
同被引文献9
-
1ZHANGPeng,DUYun hui.Relationshipbetween solidfractionanddistributionofPbinAl Pbingot[].TransNonferrMetalSoc.2001
-
2ZHANGPeng,DUYun hui.PreparationofQTi4.34graphitebysemi solidcastingtechnology[].Jour nalofWuhanUniversityofTechnology Materials ScienceEdition.2005
-
3SUNDa ren,ZHANGMing zhe.Fabricationandmi crostructureofcastingAl Pbslidingbearingalloy[].JournalofSpecialCastingandNonferrousMetal.1998
-
4LepperK,ChashechkinaJ.Slidingbehaviorofselect edaluminum[].Wear.1997
-
5KennethB.Metalbasecompositematerial[]..1982
-
6ZHANGPeng,DUYun hui.Modelingandoptimizing ofsteelandmushyAl28Pballoybonding[].TransNonferrMetalSoc.2001
-
7DavisJR.Aluminumandaluminumalloys[]..1993
-
8ZHANGPeng,DUYun hui.Semi solidprocessing ofsteel Al7graphitebindingplate[].Journalof WuhanUniversityofTechnology MaterialsScience Edition.2002
-
9MohanS,RayS.Theeffectofleadcontentonwear characteristicofAstir castAl Pballoy[].Wear.1990
-
1张鹏,杜云慧,刘汉武,曾大本,崔建忠,巴立民.Mechanical relationship in steel-aluminum solid to liquid bonding[J].中国有色金属学会会刊：英文版,2003,13(4):785-789.
-
2张鹏.Semi-solid Processing of Steel-Al-7 Graphite Binding Plate[J].Journal of Wuhan University of Technology(Materials Science),2002,17(3):46-49. 被引量：2
-
3张鹏.The Bonding Properties of Solid Steel to Liquid Aluminum[J].Journal of Wuhan University of Technology(Materials Science),2005,20(1):25-29.
-
4张鹏,杜云慧,曾大本,任学平,崔建忠,巴立民.Modeling and optimizing of steel and mushy Al-28Pb alloy bonding[J].中国有色金属学会会刊：英文版,2001,11(2):239-243. 被引量：4
-
5张鹏,杜云慧,刘汉武,曾大本,崔建忠,巴立民.Interfacial structure of steel-Al-28Pb bonding plate with semisolid rolling-casting method[J].中国有色金属学会会刊：英文版,2004,14(2):325-329.
-
6PengZHANG,YunhuiDU,HanwuLIU,DabenZENG,JianzhongCUI,LiminBA.Interfacial Structure of Steel-Mushy Al-20Sn Bonding Plate[J].Journal of Materials Science & Technology,2004,20(2):193-195.
-
7张鹏,杜云慧,刘汉武,曾大本,崔建忠,巴立民.Effect of solid fraction on steel-mushy Cu-graphite pressing bonding[J].中国有色金属学会会刊：英文版,2004,14(5):918-921.
-
8李晓泉,杜则裕,杨旭光.Hot spray technology of TA7 titanium alloy coated by molybdenum and its bonding strength[J].China Welding,2006,15(3):20-23. 被引量：1
-
9于治水,李晓泉,吴铭芳,王凤江.Influence of diffusion bonding conditions on bonding strength of damping copper alloy to stainless steel[J].China Welding,1999,8(1):52-57.
-
10张鹏,杜云慧,邢书明,张励忠,曾大本,崔建忠,巴立民.Relationship between solid fraction of slurry and property of steel/mushy Al-20Sn semi-solid bonding[J].中国有色金属学会会刊：英文版,2002,12(5):914-917. 被引量：4
