Microstructural Evolution of Pearlite in Eutectoid Fe-C Alloys during Severe Cold Rolling
被引量:9
Microstructural Evolution of Pearlite in Eutectoid Fe-C Alloys during Severe Cold Rolling
基金
The financial support of the Iron and Alloy Institute of Japan is gratefully acknowledged.One of the authors(Wantang Fu)appreciates the support from the National Natural Science Foundation of China(No.50271061).
参考文献14
-
1S.Tagashira, K.Sakai, T.Furuhara and T.Maki: ISIJ Int.,2000, 40, 1149.
-
2W.J.Nam, C.M.Bae, J.Sei. Oh and S.J.Kwon: Scripta Mater., 2000, 42, 457.
-
3H.Paqueton and A.Pineau: J. Iron Steel Inst., 1971, 209,991.
-
4T.Maki and T.Furuhara: Proc. of the 21st RisΦ Int.Syrup. on Mater. Sci., Roskilde, Denmark 2000, 125.
-
5T.Mizoguchi, T.Furuhara and T.Maki: Proc. of the Int. Syrup. on Ultraline Grained Steels (ISUGS 2001),Fukuoka, Japan, 2001, 198.
-
6T.Furuhara, E.Sato, T.Mizoguchi, S.Furimoto and T.Maki: Mater. Trans. JIM, 2002, 43, 2455.
-
7Y.Daitoh and T.Hamada: Tetsu-to-Hagane, 2000, 86,105. (in Japanese).
-
8X.Sauvage, J.Copreaux, F.Danoix and D.Blavette: Philos. Mag. A, 2000, 80, 781.
-
9F.Danoxi, D.Julien, X.Sauvage and J.Copreaux: Mater.Sci. Eng. A, 1998, 250, 8.
-
10Z.G.Liu, X.J.Hao, K.Masnyama, M.Umemoto and S.M.Hao: Scripta Mater., 2001, 44, 1775.
同被引文献55
-
1赵西成,王媛,王经涛.Q235钢C方式等径弯曲通道变形及组织研究[J].热加工工艺,2005,34(1):5-7. 被引量:7
-
2孙淑华,熊毅,傅万堂,邢广忠,古原忠,牧正志.共析珠光体钢在冷轧过程中的组织变化[J].金属学报,2005,41(3):267-270. 被引量:14
-
3YandongLIU,QiwuJIANG,GangWang,YandongWANG,A.Tidu,LiangZUO.Influence of Microstructures and Textures on the Torsional Behavior of Pearlitic Wires[J].Journal of Materials Science & Technology,2005,21(3):357-360. 被引量:14
-
4许云华,彭建洪,岑启宏.高强度珠光体钢丝增强聚氨酯复合材料的三体磨料磨损研究[J].热加工工艺,2005,34(8):56-58. 被引量:4
-
5马全仓,毛卫民,冯惠平.工业铝板的低应变量拉伸变形行为[J].塑性工程学报,2005,12(6):89-93. 被引量:6
-
6涂益友,刘响亮,蒋建清,蔡磊,卞建春.退火工艺对强塑性变形珠光体钢丝组织和性能的影响[J].材料热处理学报,2006,27(5):43-45. 被引量:5
-
7蒙肇斌,胡光立,陈彦.热处理工艺和爆炸预硬化对高锰钢ZGMn13组织和耐磨性的影响[J].金属热处理,1997,22(1):31-32. 被引量:11
-
8崔发明.高碳钢丝扭转断裂原因分析[J].金属制品,2007,33(3):39-41. 被引量:11
-
9Toribio J.Relationship between microstructure and strength in eutectoid steels [J].Materials Science and Engineering,2004,387-389A:227-230.
-
10Gil Sevillano J. Temperature plastic deformation of pearlitic cementite[J].Science and Engineering, 1975, ( 21 ) :221-225.
引证文献9
-
1刘文刚,许云华,方亮,彭建洪,周志斌.冷拉珠光体钢丝的组织演变及性能变化[J].热加工工艺,2006,35(16):33-35. 被引量:6
-
2刘文刚,许云华,方亮,冯群.深度拉伸塑性变形对0.7%碳钢耐磨性的影响[J].摩擦学学报,2007,27(2):176-180.
-
3赵军,王宝忠,王振华,赵德利,傅万堂.室温等径角挤压后共析珠光体钢的组织特性[J].特殊钢,2007,28(6):18-20.
-
4姚旭升,刘沿东,左良.冷拔珠光体钢丝帘线中织构演变的定量研究[J].钢铁,2008,43(3):65-67. 被引量:7
-
5崔怀周,陈伟庆,毛卫民,曹长发,张启柱.轧制工艺对帘线钢盘条织构的影响[J].北京科技大学学报,2011,33(8):947-951. 被引量:7
-
6张正贵,朱万波,姚旭升,陈昊男,肖铁.退火温度对冷拔钢丝织构与性能的影响[J].金属热处理,2019,44(1):22-25. 被引量:3
-
7熊毅,贺甜甜,李鹏燕,陈路飞,任凤章,Alex A.Volinsky.Effects of laser pulse energy on surface microstructure and mechanical properties of high carbon steel[J].Journal of Central South University,2015,22(12):4515-4520. 被引量:2
-
8朱家晨,刘静,程朝阳,鲁修宇.盘条组织及织构对桥梁缆索钢丝扭转性能的影响[J].热加工工艺,2016,45(18):49-52. 被引量:8
-
9陈焕友,李烈军,邢献强,彭政务.高碳钢丝冷拔中的组织演变和强化机理研究[J].热加工工艺,2019,48(3):43-47. 被引量:3
二级引证文献35
-
1李璐君,朱志雄,曹志强,田树生,易丹青,张鸿.SWRCH15A冷镦钢形变特征与组织结构研究[J].材料导报(纳米与新材料专辑),2009,23(2):555-558. 被引量:3
-
2崔影,刘艳,刘震,杨冕君.电梯曳引钢丝绳强度级别讨论[J].金属制品,2010,36(6):70-72. 被引量:4
-
3邓丽萍,杨晓芳,卢亚峰,梁明,刘庆.Cu/Nb微观复合线材中Cu沿径向的织构研究[J].电子显微学报,2011,30(4):399-402. 被引量:5
-
4王辉,陈凯媛,陈静思,黄海波,李凡.冷拔高碳钢丝高温退火前后显微组织及织构变化[J].理化检验(物理分册),2012,48(2):83-86. 被引量:2
-
5吴义群.电梯曳引钢丝绳强度的级别探析[J].科技资讯,2012,10(12):106-106. 被引量:4
-
6王丽萍,王立峰,罗志俊,李舒笳,王勇,王猛,马跃.帘线钢表面氧化优化工艺及控制机理研究[J].材料科学与工艺,2014,22(1):94-99. 被引量:4
-
7张亮.浅议电梯曳引钢丝绳的强度控制[J].华东科技(学术版),2014(7):315-315.
-
8廖舒纶,卢立华,沈奎,麻晗.精轧与吐丝温度对72A帘线钢盘条组织、织构和性能的影响[J].特殊钢,2014,35(4):59-61. 被引量:4
-
9孟献峰,孟号翔.冷拉条件下体育器材用SAE1008低碳钢的微观组织与力学性能研究[J].铸造技术,2014,35(12):2803-2805. 被引量:2
-
10王昆鹏,姜敏,赵昊乾,王新华,王郢.切割丝用盘条非金属夹杂物对比分析[J].钢铁,2016,51(1):33-38. 被引量:12
-
1Liang Guoxian,Wang Erde,Li Zhiming(College of Materials Science and Engineering, Harbin Institute of Technologg,Harbin 150001).FORMATION OF AMORPHOUS Ni-Ti ALLOY BY MECHANICAL ALLOYING[J].中国有色金属学会会刊:英文版,1994,4(4):83-86. 被引量:1
-
2M.W. Li,R.Z. Tang and W.X. Li (Department of Materials Science and Engineering, Central South University of Technology, Changsha 410083, China).AMORPHIZATION TRANSFORMATION BY MECHANICAL ALLOYING IN THE Mo-Si SYSTEM[J].Acta Metallurgica Sinica(English Letters),1997,10(2):134-140. 被引量:1
-
3卢艳丽,陈铮,王永欣.Computer simulation for the effect of coherent strain on the precipitation progress of binary alloy[J].Journal of Harbin Institute of Technology(New Series),2007,14(5):634-640.
-
4Fu-yu Dong,Song-song Lu,Yue Zhang,Qing-chun Xiang,Hong-jun Huang,Xiao-guang Yuan,Xiao-jiao Zuo,Liang-shun Luo,Yan-qing Su,Bin-bin Wang.Hydrogen-induced amorphization of Zr-Cu-Ni-Al alloy[J].China Foundry,2017,14(2):145-150.
-
5彭秋明,马宁,李慧.Gadolinium solubility and precipitate identification in Mg-Gd binary alloy[J].Journal of Rare Earths,2012,30(10):1064-1068. 被引量:7
-
6WANG Yan,DING JunFeng,BAI YanWen.Influence of B,Al and Nb addition on the glass forming ability and stability of mechanically alloyed Zr-Ni amorphous alloys[J].Chinese Science Bulletin,2011,56(36):3919-3925. 被引量:5
-
7WANG Weihua,XIAO Keqin,CHU Zhaoqin,DONG Yuanda,WANG Gengmiao.FORMATION OF AMORPHOUS Al_(80)Fe_(20)BY MECHANICAL ALLOYING[J].Acta Metallurgica Sinica(English Letters),1991,4(8):93-97.
-
8JunZhang,DongLi.Precipitation of ordered α_2 phase in a near-α titanium alloy with duplex microstructure[J].Journal of University of Science and Technology Beijing,2002,9(3):202-205. 被引量:1
-
9魏尚海,陈云贵,唐永柏,刘明,肖素芬,章晓萍,赵源华.Compressive creep behavior of Mg-Sn binary alloy[J].中国有色金属学会会刊:英文版,2008,18(A01):214-217. 被引量:1
-
10陈玉安,杨丽玲,林嘉靖,程绩,潘复生.Hydriding/dehydriding properties of Mg-Ni-based ternary alloys synthesized by mechanical grinding[J].Transactions of Nonferrous Metals Society of China,2010,20(B07):624-629. 被引量:1