期刊文献+

双正交变换域扩频通信抗干扰技术

Biorthogonal Transform Domain Interference Suppression Technique
下载PDF
导出
摘要 引入一种新的调制重叠双正交变换(MLBT)用于扩频通信窄带干扰抑制.与Malvar的MLBT相比,新的MLBT采用优化的窗函数生成基函数,其综合基函数具有更大的阻带衰减和更快的衰减速率,可更有效地将连续波干扰信号的能量压缩在有限的变换域子带内.仿真结果表明,基于这种MLBT的干扰抑制方法可有效抑制连续波干扰和窄带高斯干扰,其性能明显优于调制重叠变换. A new modulated lapped biorthogonal transform (MLBT) was introduced for narrowband interference suppression in spread spectrum communications. Compared with Malvar's MLBT, the proposed MLBT utilizes optimized windows to construct the basis functions. The synthesis basis functions of the proposed MLBT have better stopband attenuation and faster decay velocity, thus, they are more efficient in confining the energy of continuous wave (CW) tone jammer to the least number of transform bins. The simulation results show that the lapped biorthogonal transform domain interference excision technique based on the proposed MLBT is capable of excising CW interference and narrowband Gaussian interference with performance superior to that of the modulated lapped transform (MLT) based excision technique.
出处 《上海交通大学学报》 EI CAS CSCD 北大核心 2005年第4期610-613,共4页 Journal of Shanghai Jiaotong University
基金 国家自然科学基金资助项目(60172018)
关键词 调制重叠双正交变换 调制重叠变换 变换域处理 Bit error rate Cochannel interference Computer simulation Frequency response Gaussian noise (electronic) Signal processing Signal to noise ratio Spread spectrum communication
  • 相关文献

参考文献4

  • 1Malvar H S. Signal processing with lapped transforms [M]. Boston,MA:Artech House,1992.
  • 2Medley M J. Narrow-band interference excision in spread spectrum systems using lapped transform [J].IEEE Trans on Communication, 1997,45 (11): 1444-1455.
  • 3Malvar H S. Biorthogonal and nonuniform lapped transforms for transform coding with reduced blocking and ringing artifacts[J]. IEEE Trans on Signal Processing, 1998,46(4):1043-1053.
  • 4Matviyenko G. Optimized local trigonometric bases [J]. Applied and Computational Harmonic Analysis,1996, (3) :301 -323.

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部