摘要
为了解决某冷连轧机组在生产实践中对板形和表面粗糙度协同控制的问题,在大 量现场实测与实验的基础上,通过研究板形生成规律及带钢表面粗糙度形成规律,揭示了板 形与表面粗糙度控制中产生矛盾的根源及本质,提出了合理的解决方案,取得了良好的现场 应用效果.
The surface roughness and flatness of cold rolled strips are important control aims, especially when cold strip coils are processed in batch-type annealing furnaces. However, it is found that surface roughness control is in contradiction with strip flatness control in the production of 2030 mm cold tandem mills. Based on lots of tests and measurements, originating and developing principles of strip flatness and surface roughness were studied. According to the results of research, solutions for the problem were proposed and proved to be effective in strip production.
出处
《北京科技大学学报》
EI
CAS
CSCD
北大核心
2005年第2期232-234,共3页
Journal of University of Science and Technology Beijing
基金
国家自然科学基金资助项目(No.59835170)
