摘要
In order to improve the machinability but not to impair other properties of the prehardened mold steel for plastic, the composition was designed by application of Thermo-Calc software package to regulate the type of non-metallic inclusion formed in the steel. The regulated non-metallic inclusion type was also observed by SEM and EDX. Then the machinability assessment of the steel with designed composition under different conditions was studied by the measurement of tool wear amount and cutting force. The results show that the composition of free cutting elements adding to mold steel for plastic can be optimized to obtain proper type of non-metallic inclusion in the aid of Thermo-Calc, compared with the large volume fraction of soft inclusion which is needed for promoting ductile fracture at low cutting speeds, the proper type of inclusion at high cutting speeds is glassy oxide inclusion. All those can be obtained in the present work.
In order to improve the machinability but not to impair other properties of the prehardened mold steel for plastic, the composition was designed by application of Thermo-Calc software package to regulate the type of non-metallic inclusion formed in the steel. The regulated non-metallic inclusion type was also observed by SEM and EDX. Then the machinability assessment of the steel with designed composition under different conditions was studied by the measurement of tool wear amount and cutting force. The results show that the composition of free cutting elements adding to mold steel for plastic can be optimized to obtain proper type of non-metallic inclusion in the aid of Thermo-Calc, compared with the large volume fraction of soft inclusion which is needed for promoting ductile fracture at low cutting speeds, the proper type of inclusion at high cutting speeds is glassy oxide inclusion. All those can be obtained in the present work.
出处
《中国有色金属学会会刊:英文版》
CSCD
2005年第2期437-442,共6页
Transactions of Nonferrous Metals Society of China
基金
Project(015211010) supported by the Key Project of Science and Technology Commission of Shanghai Local Govern ment
China
关键词
非金属杂质
型模钢
塑料预硬化
热-钙软件包
prehardened mold steel for plastic
machinability
Thermo-Calc software package
non-metallic inclusion