期刊文献+

高压作用下合金凝固的研究进展 被引量:25

New Advance of Alloy Solidification Process Under High Pressure
下载PDF
导出
摘要 综述了高压作用下合金凝固的研究现状,重点介绍高压作用下晶粒形核、长大模型、溶质扩散等理论模型,以及高压在材料制备中的应用,最后对高压作用下的合金凝固过程的研究进行了评价与展望。 The new developments of alloy solidification process under high pressure have been presented in this paper. The nucleation model, growing model of grains and solute transfer model were described in details, and the status of preparing of alloy materials under high pressure is introduced in this paper too. Finally, the future development of alloy solidification process under high pressure is evaluated and prospected.
出处 《铸造》 EI CAS CSCD 北大核心 2005年第6期539-541,共3页 Foundry
基金 国家自然科学基金资助项目(50275098)
关键词 合金 凝固 高压 理论模型 alloy solidification high pressure theory models
  • 相关文献

参考文献7

二级参考文献44

  • 1李冬剑,王景唐,丁炳哲,李淑苓.压力诱致非晶合金形成[J].高压物理学报,1994,8(1):73-79. 被引量:3
  • 2倪思康.双辊式薄带连铸工艺研究[J].上海金属,1994,16(2):13-19. 被引量:13
  • 3张丕军,刘小梅,张丕军.国内外薄带连铸技术的发展与现状[J].宝钢技术,1996(5):14-20. 被引量:4
  • 4张锦升 罗守靖译.金属和合金在压力下的结晶[M].哈尔滨:哈尔滨工业大学出版社,1987..
  • 5Savas M, Altintas A. The Microstuctural Control of Cast and Mechanical Properties of Zinc-Alminium Alloys. Journal of Materials Science, 1993,28:1 775 -1 780.
  • 6Lamberigts M. Friction and Ducility Behaviors of a High Strengh Zinc Foundry Alloy. AFS Transactions, 1985,93:569 -- 578.
  • 7白丙忠.世界带钢连铸技术新发展[J].世界金属导报,1996,3:25-25.
  • 8Kim W S, Chung H, et al. Study of heat transfer coefficient value of solidification in twin-roll strip casting process [J]. RIST Journal of R&D, 1999,13(4): 396~402
  • 9Kajiwars S,Onishi K. Numerical analysis on fluid dynamic phenomena in a strip caster mold [J]. Journal of the Iron and Steel Institute of Japan, 1999,85 (11): 785~792
  • 10Mizoguchi, Toshiaki, Miyazawa, Ken-ichi, Ueshima, Yoshiyuki. Relation between surface quality of cast strips and meniscus profile of molten pool in the twin roll casting process [J]. ISIJ International, 1996,36(4) : 417~423

共引文献73

同被引文献212

引证文献25

二级引证文献75

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部