期刊文献+

熔融缩聚法合成的聚乳酸熔体的流变性能研究 被引量:5

Rheological Behavior of Poly(L-lacticacid)(PLLA )Prepared by Melting Condensation
下载PDF
导出
摘要 采用锥板流变仪研究聚L-乳酸(PLLA)的流变性能,并对直接法熔融缩聚制备的聚乳酸进行了测试。结果表明:PLLA熔体属于切力变稀流体;PLLA熔体的表观粘流活化能较高,其表观黏度对温度的敏感性高。 Rheological behavior of PLLA melt was tested using cone-and-plate rheometer. It was found that PLLA melt was shear thinning fluid. The flow activation energy of PLLA was higher than that of regular polymer, which indicated that the viscosity of PLLA was more sensitive to temperature. In this paper, PLLA was prepared by melting condensation.
作者 兰平 喻琳艳
出处 《合成纤维》 CAS 北大核心 2005年第5期4-6,11,共4页 Synthetic Fiber in China
关键词 聚乳酸 锥板流变仪 熔体 流变 poly(lactic acid), cone-and-plate rheometer, melt, rheological behavior
  • 相关文献

参考文献11

  • 1何曼君 陈维孝.高分子物理[M].上海:复旦大学出版社,1986.276.
  • 2D W Grijpma, G J Zondervan, et al. High molecular weight copolymers of L-lactide and ε -caprolactone as biodegradable elastomeric implant materials. Polym Bull. 1991, 25:327~333.
  • 3G Chen, TUshida, et al. Preparation of poly(L-lactic acid) and poly(DL-lactic-co-glycolic acid) foams by use of ice microparticulates.Biomaterials, 2001, 22: 2563~2567.
  • 4M Dunne, O I Corrigan, et al. Influence of particle size and dissolution conditions on the degradation properties of polylactide-co-glycolide particles, biomaterials, 2000, 21: 1659~1668.
  • 5D K Gilding, A M Reed. Biodegradable polymers for use insurgery-polyglycolic/poly(actic acid) homo-and copolymers: 1, Polymer,1979, 20:1459~1464.
  • 6Khaled Mezghani, J E Spruiell. High speed melt spinning of poly (L-lactic acid) filaments. Journal of Polymer Science: Part B: Polymer.Physics, 1998, 36:1005~1012.
  • 7Masao Matsui. Biodegradable fibers made of poly-lactic acid [J]. Chemical Fibers International, 1996,46(5):318.
  • 8Unitika. Polylactic biodegradable fiber products [J]. Chemical Fibers International, 1999,49( 1 ):5.
  • 9北尾敏男.[A]..高分子论文集[C].,1984,41(12).17.
  • 10沈新元,刘洪斌,金晨倩,王胜东,郯志清,杨庆.聚乳酸熔体流变性的研究[J].合成纤维工业,2002,25(5):1-3. 被引量:6

二级参考文献6

共引文献7

同被引文献28

  • 1杜启玫,周持兴.哈克转矩流变仪在聚合物加工中的应用[J].实验室研究与探索,2004,23(7):46-47. 被引量:24
  • 2许莹,邵惠丽,胡学超.再生丝素/NMMO·H_2O溶液的流变性能[J].功能高分子学报,2004,17(3):425-428. 被引量:7
  • 3李亚滨,寇士军.聚乳酸/聚乙醇酸复合纤维的性能探讨[J].合成纤维工业,2005,28(1):20-22. 被引量:5
  • 4秦志忠,秦传香.聚乳酸的流变性能研究[J].合成技术及应用,2005,20(3):5-7. 被引量:6
  • 5SOFIA S, MCCARTHY M B, GRONOWICZ G. Functionalizedsilk- based biomaterials for bone formation[J]. J. Biomed. Mater. Res. , 2001, 54: 139-148.
  • 6TAJITSU Y. Optical rotatory power of biodegradable polylactic acid films[J]. Macromol. Syrnp. , 2004, 212: 201-208.
  • 7GONZALEZ M F, RUSECKAITE R A, CUADRADO T R. Structural changes of polylactic-aeid ( PLA ) microspheres underhydrolytie degradation[J]. J. Appl. Polym..Sci. , 1999(71): 1223-1230.
  • 8[1]Ajioka M,Enomoto K,Suzuki K,et al.Basic properties of polylactic acid produced by the direct condensation polymer2ization of lactic acid[J].Bull.Chem.Soc.Jpn.1995,68(8):2125-2131.
  • 9[3]Woo S I,Kim B O,Jun H S,et al.Polymerization of aqueous lactic acid to prepare high molecular weight poly (lactic acid) by chain2extending with hexamethylene diisocyanate[J].Polymer.Bull.1995,35(4):415-421.
  • 10[6]Gruber P R.Hydroxyl-terminated lactide polymer composition[P].US:5446 123,19951.

引证文献5

二级引证文献32

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部