期刊文献+

含钛炉渣碱度表示方法的比较 被引量:1

Comparison of Different Expressions of the Basicities of Slags-containing Titania
下载PDF
导出
摘要 从脱硫的角度对3种实用的含钛炉渣碱度表示方法作了比较。光学碱度在炉渣组分变化很大的范围内,均能较满意地揭示含钛炉渣的冶金性能。在1500℃和1450℃下由气/渣和金/渣平衡数据,分别求得硫容量与光学碱度的相互关系:1500℃:lgCs=9.20∧-10.08r=0.901450℃:lgCs=15.26∧-13.28r=0.99。 Three kinds of the practcal basicity for slags-containing titania were comparedfrom desulphurization standpoint.The research shows that the optical basicity can satisfactorily re-veaI the metallu rgical property of these slags within wide range of Component varying.The relation-ships between optical basicity and sulphure capacity obtained respectively from equilibrium experi-ments of gas-slag and metal-slag are as follows at 1500 ℃: lgCs=9.20-10.08 r=0.90 at 1450℃:lgCs=15.26-13.28 r=0. 99.
作者 徐宗亮
出处 《重庆大学学报(自然科学版)》 CAS CSCD 1994年第5期105-109,共5页 Journal of Chongqing University
基金 国家自然科学基金
关键词 含钛炉渣 硫容量 光学碱度 炉渣 sla8-containing titania sulphure capacity optical basicity
  • 相关文献

参考文献3

  • 1王喜庆,钢铁钒钛,1989年,10卷,1期,1页
  • 2屈经文,1987年
  • 3杨祖磐,东北工学院学报,1981年,2卷,3期,53页

同被引文献14

  • 1吴巍,刘浏,韩志军.不锈钢连铸工艺的研究[J].钢铁,2004,39(z1):561-565. 被引量:10
  • 2张洪波.连铸坯表面振痕的控制[J].河北冶金,1995(5):29-32. 被引量:9
  • 3张林涛,邓安元,王恩刚,赫冀成.连铸坯表面振痕的形成及影响因素[J].炼钢,2006,22(4):35-39. 被引量:23
  • 4王谦,解丹,何生平,王平.特殊组分对低氟保护渣凝固温度和结晶性能的影响[J].钢铁研究学报,2007,19(6):38-41. 被引量:3
  • 5Mukongo T Pistorius P C,Garbers-Craig A M.Viscosity Effect of Titanium Pickup by Mould Fluxes for Stainless Steel[J].Ironmaking Steelmaking,2004,31(2):135-143.
  • 6Orrling C.Tilliander A,Kashiwaya Y et al.Melting and Solidification of Mold Slags[A].Barker W P.Steelmaking Conference Proceedings[C].USA:Iron and Steel Society,1999,82:417-424.
  • 7Martin E,Bell H B.Activities in the System MnO-TiO2 at 1500℃[J].Trans.Inst.Min.Metall.,1974,83:C193-C196.
  • 8Fine H A,Arac S.Effect of Minor Constituents on Liquidus Temperature of Synthetic Blast-furnace Slags[J].Ironmakjng Steelmaking,1980,7(4):160-166.
  • 9Sommerville I D,Bell H D.Behavior of Titania in Metallurgical Slags[J].Can.Metall.Q.,1982,2l(2):145-155.
  • 10Nakato H,Sakuraya T Nozaki T et al.Physical and Chemical Properties of Casting Powders Affecting the Mold Lubrication during Continuous Casting[A].Stovall R、W.Steelmaking Conference Proceedings[C].USA:Iron and Steel Society,1986,69:137-143.

引证文献1

二级引证文献9

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部