期刊文献+

卷烟厂风力送丝速度测量方法探讨 被引量:1

Explore the Technology of Measuring the Pneumatic Velocity
下载PDF
导出
摘要 针对目前用速度仪器难以直接测量风力送丝速度,只能通过测量回风管内的风速来验证送丝速度.用试验的方法结合MATLAB技术研究物料速度与静压的关系,从而通过测量送料管内的静压计算出物料风送速度. Because we could not measure the pneumatic velocity in the supplying pipes with any apparatus, we validated it by measuring the velocity in the returning pipes. The author researched the relation between velocity of material and immobile pressure with experimentation and the MATLAB technology, by which we could measure the pneumatic velocity of material in the supplying pipes.
出处 《南华大学学报(自然科学版)》 2005年第1期22-24,共3页 Journal of University of South China:Science and Technology
关键词 卷烟厂 静压 拟合公式 风力送丝速度 测量方法 回风管 cigar mill pneumatic velocity immobile pressure fit and pursue formula
  • 相关文献

参考文献6

二级参考文献21

  • 1程克勤.中国物料搬运学会第二届年会论文集[M].,1984..
  • 2富田侑嗣.-[J].粉体工学会志,1997,(6):34-34.
  • 3盐见弘.可靠性工程基础[M].北京:科学出版社,1982..
  • 4袁一军.高负压系统稳定性及可靠性分析[M].南昌:核工业第六研究所,1992..
  • 5戴石良.卷接设备工艺风力与卷烟生产的关系[M].南昌:核工业第六研究所,1994..
  • 6许成法.前向风机变形设计的实验研究[J].流体工程,1985,(1):15-15.
  • 7Konrad K, Harrison D, Nedderman R M, Davidson J F. Prediction of the pressure drop for horizontal dense phase penumatic conveying of particles, Pneumotransport 5, paper El, In: Fifth international conference on the pneumartic transport of solids in pipes, London, 1980-04-16~18. UK: BHRA Fluid Engineering, 1980. 225~244
  • 8Mi B, Wypych P W. Pressure drop prediction in low-velocity pneumatic conveying. Powder Technology, 1994, 18:125~137
  • 9Pan R, Wypych P W. Pressure drop prediction in single-slug pneumatic conveying. Powder Handing & Processing, 1995, 7:63~68
  • 10Pan P, Wypych P W. Pressure drop and slug velocity in low-velocity pneumatic conveying of bulk solids. Powder Technology, 1997, 94:123~132

共引文献34

同被引文献9

引证文献1

二级引证文献4

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部