期刊文献+

聚酯亚胺多元醇酸值分析的新方法 被引量:1

New Method for Analysis of Acid Number in Polyester Imide Polyols
下载PDF
导出
摘要 聚酯亚胺多元醇酸值是聚氨酯的一个重要指标。通常测定酸值时,一般使用酚酞作为指示剂。但是对于改性聚酯多元醇,用酚酞作为指示剂其终点难以判断,故采用电位滴定法测聚酯亚胺多元醇的酸值,同时使用各种酸碱指示剂用来指示滴定终点,结合两者得出一个最佳的指示剂。研究表明溴百里酚蓝为测定聚酯亚胺多元醇测定酸值最合适的指示剂。提供了聚酯亚胺多元醇起始电位值与酸值的标准曲线图,能快速、简便地查出相同条件下不同样品的酸值。 The acid number of polyester imides polyol is a critical value for qualified polyurethane. Conventionally, acid number is determined by use of phenolphthalein as indicator. But it is difficult for end point determination in modified polyester polyol system. Therefore potentiometric titration is used for determination of acid number of polyester imide, as well as pH indicators. It is shown that bromocresol blue is the most suitable indicator for determination of acid number of polyester imide polyols. The initial potentials of polyester imide polyol and standard curve of acid number are given, which are helpful for determination of the acid numbers of different samples at same conditions.
出处 《涂料工业》 CAS CSCD 2005年第7期41-43,共3页 Paint & Coatings Industry
关键词 聚酯亚胺 酸值 聚酯多元醇 电位滴定法 酸碱指示剂 溴百里酚蓝 滴定终点 同时使用 测定 聚氨酯 曲线图 电位值 酚酞 potentiometric titration, polyester imide polyol, indicator, standard curve, acid number
  • 相关文献

参考文献7

  • 1左晓兵,蒋锡群,杨昌正.芳香酸改性酰胺酰亚胺聚氨酯的合成与性能[J].高分子材料科学与工程,2003,19(6):96-99. 被引量:3
  • 2Jiang B B, Hao J J,Wang W Y,et al. Synthesis and Thermal Properties of Poly( urethaneimide). J Appl Polym Sci ,2001 ,81 :773 -781.
  • 3Somani K, Kansara S, Parmar R, et al. High Solids Polyurethane Coatings from Castor - Oilbased Polyester - Polyols. International Journal of Polymeric Matericals ,2004,53 ( 3 ) :283 - 294.
  • 4Wamprecht C,Pires R, Freudenberg U,et al. Polyesterpolyols having Cyclic Imide and Isocyanurate Groups are Useful in Two Component or One Component Coating Compositions for Auto Repair, Vehicle Coating or General Industrial Coating. 德国专利, 10 237 195. 2004.
  • 5Marengo E,Bobba M, Robotti E,et al. Hydroxyl and Acid Number Prediction in Polyester Resins by Near Infrared Spectroscopy and Artificial Neural Networks. Analytica Chimica Acta, 2004,511 ( 2 ):313 -323.
  • 6Dutta N,Karak N,Dolui S K. Synthesis and Characterization of Polyester Resins Based on Nahar seed oil. Progress in Organic Coating,2004,49(2),146 - 153.
  • 7徐妙玲.聚酯多元醇中酸值的测定[J].聚氨酯工业,1994,9(2):38-40. 被引量:4

二级参考文献9

  • 1[1]Masiulanis B, Zielinski R. J. Appl. Polym. Sci., 1985, 30: 2731.
  • 2[2]Zuo M, Takeichi T. Polymer, 1999, 40: 5153~5160.
  • 3[3]Ho K S, Chen L W. J. Polym. Sci. Part A: Polym. Chem., 1997, 35: 1703~1710.
  • 4[4]Jiang B B, Hao J J, Wang W Y, et al. J. Appl. Polym. Sci., 2001, 81: 773~781.
  • 5[5]Ulrich H. Encyclopedia of Polymer Science and Engineering. 2nd edn. Mark H F , Bikales N M , Overberger C G, et al. Wiley, New York, 1987: 8, 448.
  • 6[6]Meryers R A. J. Polym. Sci. Part A: Polym. Chem., 1969, 7: 2757~2762.
  • 7[7]Avadhani C V , Wadgaonkar P P , Vernekar S P. J. Appl. Polym. Sci., 1992, 45: 1335.
  • 8[8]Gnanarajan T P, Sultan Nasar A, Padmanabha Iyer N, et al. J. Polym. Sci. Part A: Polym. Chem., 2000, 38: 4032.
  • 9[9]Matsuo R, Niki A. JP, 07330856(1995).

共引文献5

同被引文献7

  • 1左晓兵,宁春花,周弟,李爱英,张建耀,朱亚辉.多异氰酸酯封闭物的合成及脱封反应研究[J].高校化学工程学报,2008,22(3):543-546. 被引量:1
  • 2Lal B.Effect of thin solid insulating material when verifying clearances by electric strength test[J].IEEE PSES Product Safety Engineering Newsletter,2003,3 (2):13-16.
  • 3Wolfgang Schuelke,Rainer Krause,Diethard Winkler.Binder for a coating composition for electrical conductors[P].USP:392000,2002-05-21.
  • 4Payette L J.Solderable wire enamel[J].Electrical Insulation Magazine,IEEE,1990,6(5):8-12.
  • 5Hisayuki H,Susumu K,Tamon O et al.Enameled wire[P].USP:6906258,2005-06-14.
  • 6Atsushi H,Isamu K,Atsushi T.Multilayer insulated wire and transformer using the same[P].USP:6525272,2003-2-25.
  • 7MA De-zhu(马德柱),HE Ping-sheng,(何平笙),XU Zhong-de(徐种德) et al.Structure and Properties of Polymer(高聚物的结构与性能)[M].Beijing(北京):Science Press(科学出版社).1995.

引证文献1

二级引证文献4

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部