期刊文献+

SHPB横向冲击法研究AF/ZF混杂纤维复合材料吸能特性 被引量:8

ENERGY ABSORPTION CHARACTERISTICS OF AF/ZF HYBRID COMPOSITE UNDER SHPB TRANSVERSE IMPACT
下载PDF
导出
摘要 采用SHPB冲击试验装置,对AF/ZF(AramidFiber/ZylonFiber)混杂纤维防弹复合材料进行了横向冲击试验,获得了不同混杂比的混杂复合材料的载荷历史与位移历史,进一步分析了其破坏过程和能量吸收特性。所得结果与不同混杂比的AF/ZF混杂纤维复合材料实弹靶试吸能特性变化趋势相似。结果表明,进行不同混杂比AF/ZF混杂纤维复合材料的横向冲击试验对预测实弹冲击的破坏吸能有参考价值。 The transverse impact test of AF/ZF (Aramid Fiber/Zylon Fiber) hybrid composite was performed by SHPB (Split Hopkinson Pressure Bar). The loading history and displacement history of the composites with different hybrid ratios were obtained, from which the failure process and energy absorption characteristics were further analyzed. The change trends of BPI (Ballistic Performance Indicator) data obtained from SHPB are similar to those of the ball firing data, indicating that the transverse impact test on AF/ZF hybrid composite has a certain reference value to predict the energy absorption of composites target in the ball firing.
出处 《复合材料学报》 EI CAS CSCD 北大核心 2005年第3期21-24,共4页 Acta Materiae Compositae Sinica
关键词 SHPB 混杂纤维复合材料 横向冲击 吸能特性 Ballistics Dynamic loads Energy absorption Failure (mechanical) Fibers Loading Strain
  • 相关文献

参考文献9

二级参考文献20

  • 1羡梦梅,曲英章.非金属材料动态性能研究介绍[J].兵器材料科学与工程,1990,13(1):43-47. 被引量:3
  • 2陈篪 蔡其巩.工程断裂力学[M].北京:国防工业出版社,1977..
  • 3姜风春.金属动态断裂的理论与实验研究[M].哈尔滨:哈尔滨工程大学,2000.34-44.
  • 4张晓欣.金属材料动态断裂韧性测试技术研究[M].哈尔滨:哈尔滨工程大学,2000.36.
  • 5张自强.装甲防护技术基础 [M].北京:兵器工业出版社,2000.159-160.
  • 6[1]N.L.Hancox: Fiber Composite Hybrid Material, Applied Science Press, London, 1981.
  • 7[2]Zuoguang ZHANG and Huancheng SONG: Hybrid Fiber Composites, Beijing University of Aeronautics and Astronautics Press, 1988. (in Chinese)
  • 8[3]R.Park and J.Jang: J. Applied Polymer Sci., 2000, 75, 952.
  • 9[4]C.Morrison: Proc. of the first ECCM, 1985, 706~712.
  • 10[5]Zhonglong CAI and Xingjuan XIAN: UHMPE Fiber Reinforced Composites, Science Publishing Press, Beijing, 1997. (inChinese)

共引文献77

同被引文献82

引证文献8

二级引证文献52

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部