Three Dimensional Numerical Simulation for the Driving Force of Weld Solidification Cracking
被引量:1
Three Dimensional Numerical Simulation for the Driving Force of Weld Solidification Cracking
基金
Financial support by the National Natural Science Foun-dation of China under grant No.50175040 is gratefully ac-Knowledged
This project(HIT-2002-41)is also supported by the Scientific Research Foundation of Harbin Institute of Technology.
参考文献14
-
1[1]Z.L.Feng: Thesis, Ohio State University, 1993.
-
2[2]Y.H.Wei, R.P. Liu and Z.J.Dong: China Welding, 1999,8(2), 135.
-
3[3]T.Zacharia: Weld. J., 1994, 73(7), 164.
-
4[4]D.Dye, O.Hunziker and R.C.Reed: Acta Mater., 2001, 49,683.
-
5[5]M.Jonsson, L.Karlsson and L.E.Lindgren: in 4th International Conference on Mechanical Behavior of Materials,1983, Stockholm, Sweden.
-
6[6]Y.Yang: Weld. J., 2000, 79(1), 9.
-
7[7]Y.Yang: in 5th International Conference on Trends in Welding Research, 1998, Pine Mountain, USA.
-
8[8]W.P.Liu: Comp. Mater. Sci., 1995, 43(9), 211.
-
9[9]Z.L.Feng, A.David and T.Zacharia et al.: Sci. Technol.Weld. Joining, 1997, 2(1), 11.
-
10[10]Y.H.Wei, R.P.Liu and Z.J.Dong: China Welding, 2000,9(1), 36.
同被引文献2
-
1董志波,魏艳红,刘仁培,董祖珏.不锈钢焊接凝固裂纹的三维数值模拟[J].材料科学与工艺,2006,14(4):353-357. 被引量:3
-
2董志波,占小红,魏艳红,卢亚峰,郭萍,杨永福.焊接凝固裂纹三维数值模拟与预测系统的前处理设计[J].焊接学报,2009,30(8):21-24. 被引量:1
-
1魏艳红,刘仁培,董祖珏.Numerical simulation of temperature fields for weld metal solidification cracking in stainless steels[J].China Welding,1999,8(1):58-63. 被引量:1
-
2R. P. Liu,Z. J. Dong and Y. H. Wei( 1)Harbin Research Institute of Welding, Harbin 150080, China 2)National Key Laboratory of Advanced Welding Production Technology, HIT, Harbin 150001, China).NUMERICAL SIMULATION OF TEMPERATURE FIELDS FOR WELD METAL SOLIDIFICATION CRACKING IN STAINLESS STEELS[J].Acta Metallurgica Sinica(English Letters),2000,13(1):139-144. 被引量:5
-
3郑振太,单平,张凯,付坤,唐新新.General expression of double ellipsoidal heat source model and its error analysis[J].China Welding,2008,17(4):22-27.
-
4龚润生,陈军.影响硬质合金粘结相结构变化的因素分析[J].硬质合金,1997,14(1):14-16. 被引量:3
-
5董志波,魏艳红,刘仁培,董祖珏.Three dimensional numerical simulation of welding temperature fields in stainless steel[J].China Welding,2004,13(1):11-15. 被引量:9
-
6魏艳红,刘仁培,董祖珏.Development of the model for simulating weld metal solidification cracking in stainless steel[J].China Welding,1999,8(2):57-62. 被引量:4
-
7曹志海,白广成,董贵文.铬不锈钢2-4Cr13钢坯热处理工艺研究[J].冶金标准化与质量,2003,41(2):15-16.
-
8Y. H. Wei,R. P. Liu and Z. J. Dong( 1) National Key Laboratory of Advanced Welding Production Technology, HIT, Harbin 150001, China 2) Harbin Research institute of Welding,Harbin 150080, China).NUMERICAL SIMULATION OF STRESS-STRAIN DISTRIBUTIONS FOR WELD METAL SOLIDIFICATION CRACKING IN STAINLESS STEEL[J].Acta Metallurgica Sinica(English Letters),2000,13(1):133-138. 被引量:2
-
9Bo, Xiangzheng, Fang, Hongsheng, Wang, Jiajun .Three Dimensional Morphology and Microstructural Evolution of Bainite in Steels[J].Journal of Materials Science & Technology,1998,14(6):559-563. 被引量:2
-
10魏艳红,刘仁培,董祖珏.不锈钢焊接凝固裂纹应力应变场数值模拟结果分析[J].焊接学报,2000,21(2):36-38. 被引量:21