摘要
The curve of crystallization transition during continuous heating for the Zr41Ti14Cu12.5Ni10Be22.5 bulk amorphous alloy was measured by means of dilatation(Fully automatic transformation recording/measuring instrument) and X-ray diffraction(XRD) method. The deformation behavior of the alloy at various heating rates in the supercooled liquid region was studied. The results show that the glass transition temperature of the alloy increases slightly and the supercooled liquid region(SLR) increases significantly with increasing heating rate. The deformation amount under isobaric pressure of 1 N for the alloy in the SLR increases with increasing heating rate. As the heating rate of the alloy increases from 5 to 100 ℃/min, the amount of deformation of the alloy increases from 8.3% to 45%.
The curve of crystallization transition during continuous heating for the ~Zr_~41 Ti_~14 Cu_~12.5 Ni_~10 Be_~22.5 bulk ~amorphous alloy was measured by means of dilatation(Fully automatic transformation recording/measuring instrument) and X-ray diffraction(XRD) method. The deformation behavior of the alloy at various heating rates in the supercooled liquid region was studied. The results show that the glass transition temperature of the alloy increases slightly and the supercooled liquid region(SLR) increases significantly with increasing heating rate. The deformation amount under isobaric pressure of 1N for the alloy in the SLR increases with increasing heating rate. As the heating rate of the alloy increases from 5 to 100℃/min, the amount of deformation of the alloy increases from 8.3% to 45%.
出处
《中国有色金属学会会刊:英文版》
CSCD
2005年第3期612-614,共3页
Transactions of Nonferrous Metals Society of China
基金
Project(10174059)supportedbytheNationalNaturalScienceFoundationofChina
Project(502171)supportedbytheNaturalScienceFoundationofHebeiProvince,China
关键词
锆钛镍钡合金
非晶态
超冷液体
形变处理
Zr_(41)Ti_(14)Cu_(12.5)Ni_(10)Be_(22.5) alloy
bulk amorphous alloy
supercooled liquid region
deformation