期刊文献+

惰性填料对SiC_f/Si-O-C陶瓷材料的性能影响 被引量:3

Influence of the Inert Fillers on the Properties of SiC_f/Si-O-C Ceramic Composite
下载PDF
导出
摘要 以聚硅氧烷为先驱体,采用先驱体转化法制备了SiCf/Si O C陶瓷复合材料。研究了惰性填料(SiC、SiO2及SiO2空心微珠)对材料的力学性能及热性能的影响。微观结构的分析表明,填料引起的界面结构与密度的变化是影响SiCf/Si O C复合材料性能的主要原因。 Silicon carbide fiber reinforced siliconoxycarbide (SiCf-/Si-O-C) ceramic composites were fabricated via precursor infiltration and pyrolysis using polysiloxane. The effects of the inert fillers (IF) SiC, SiO2, and SiO2 cenosphere on flexural strength, density, coefficient of heat conductivity of SiCf-Si-O-C composites were studied. Microstructure analysis shows that the properties are mainly influenced by the inner fillers due to the interface structure and the relative density.
出处 《国防科技大学学报》 EI CAS CSCD 北大核心 2005年第3期20-24,共5页 Journal of National University of Defense Technology
关键词 Si-O-C 聚硅氧烷 先驱体转化 陶瓷基复合材料 惰性填料 siliconoxycarbide polysiloxane precursor infiltration and pyrolysis ceramic matrix composite inert filler
  • 相关文献

参考文献7

  • 1Yasmin A, Bowen P. Footigue Behavior of Cross-by Nicalon/CAS-Ⅲ Glass-ceramic Matrin Compesifes at Room and Elerated Temperature[J]. Composi te:Part A,2004(35):83-94.
  • 2Funayama O, Oaki T, Kato T,et al. Synthesis of Thermosetting Copolymer of Polycarbosilane and Perdroppolysilazane[J]. Journal Materials Science,19 96,31(23):6369-6375.
  • 3Greil P, Seibold M. Modeling of Dimensional Changes during Polymer-ceramic Conversion for Bulk Component Fabrication[J]. Journal Materials Science ,1992,27:1053-60.
  • 4马青松,陈朝辉,郑文伟,胡海峰.聚硅氧烷/二乙烯基苯的交联与裂解[J].国防科技大学学报,2001,23(5):40-44. 被引量:20
  • 5郑文伟,陈朝辉,姚俊涛.炭纤维编织物中引入SiC微粉的超声工艺研究[J].材料工程,2004,32(3):31-34. 被引量:5
  • 6范真祥,程海峰,张长瑞,唐耿平.不同裂解温度对制备SiC_f/Si-O-C复合材料性能研究[J].国防科技大学学报,2004,26(5):13-17. 被引量:3
  • 7Rangarajan S, Belardinelli R, Aswath P B. Processing, Physical and Thermal Properties of BlackglasTM Matrix Composites Reinforced with NextelTM Fabric[J]. Journal Materials Science, 1999, 34(3): 515-533.

二级参考文献12

  • 1郑文伟,王兴业,刘风荣,肖加余,江大志.三维整体编织物增强陶瓷基复合材料的制备工艺及性能表征[J].复合材料学报,1997,14(1):48-53. 被引量:12
  • 2Renlund G M, Prochazka S, Doremus R H. Silicon Oxycarbide Glasses: PartⅡ Structure and Properties [J]. J Mater Res, 1991, 6(12): 2723-2734.
  • 3Rangarajan S, Belardinelli R, Aswath P B. Processing, Physical and Thermal Properties of BlackglasTM Matrix Composites Reinforced with NextelTM fabric [J]. J Mater Sci, 1999, 34(3): 515-533.
  • 4Rice R W. Effects of Amount, Location, and Character of Porosity on Stiffness and Strength of Ceramic Fiber Composites via Different Processing[J]. J Mater Sci, 1999, 34(12): 2769-2772.
  • 5Nakano K, Kamiya A, Nishino Y, et al. Fabrication and Characterization of Three-dimensional Carbon Fiber Reinforced Silicon Carbide and Silicon Nitride Composites [J]. J Am Ceram Soc, 1995, 78(10): 2811-2814.
  • 6Katsumi Yoshida, Budiyanto, Masamitsu Imai. Processing and Microstructure of Silicon Carbide Fiberreinforced Silicon Carbide Composite by Hot-pressing [J]. Journal of Nuclears 258-263(1998) 1960-1965.
  • 7Miriyala N, Liaw P K, et al. The Mechanical Behavior of a Nicalon/SiC Composite at Room Temperature and 1000℃ [J]. Journal of Nuclears,1998,253:1-9.
  • 8徐永东,成来飞,张立同.三维碳化硅/碳化硅陶瓷基编织体复合材料[J].无机材料学报,2001,16(2):344-348. 被引量:11
  • 9马青松,陈朝辉,郑文伟,胡海峰.聚硅氧烷/二乙烯基苯的交联与裂解[J].国防科技大学学报,2001,23(5):40-44. 被引量:20
  • 10马青松,陈朝辉,郑文伟,胡海峰.热压辅助先驱体裂解制备三维编织碳纤维增强Si-O-C复合材料的研究[J].材料工程,2002,30(5):37-39. 被引量:2

共引文献25

同被引文献80

引证文献3

二级引证文献17

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部