期刊文献+
任意字段
题名或关键词
题名
关键词
文摘
作者
第一作者
机构
刊名
分类号
参考文献
作者简介
基金资助
栏目信息

CFD在柴油机螺旋进气道评价中的应用 被引量：5

Application of CFD to Diesel Helical Intake Port Evaluation
下载PDF
导出
摘要 本文用CFD软件对直喷柴油机螺旋进气道进行了三维数值模拟;通过气道稳流试验台对模拟计算得到的Ricardo和FEV评价参数进行了验证,得出两者趋势吻合良好的结论;指出了CFD在评价柴油机螺旋进气道性能中的实用价值。 A numerical simulation is made to a DI Diesel helical intake port with CFD software and the Ricardo and FEV evaluation obtained from the simulation is validated on the steady flow test rig, which is concluded that the two match well in trend. It shows the useful value of CFD to diesel helical intake port evaluation.
作者 韩义勇 罗廉 王晓艳 罗光缉
机构地区 广西大学机械工程学院
出处 《装备制造技术》 2005年第2期8-10,50,共4页 Equipment Manufacturing Technology
关键词 CFD 螺旋进气道 三维数值模拟 稳流试验台 试验验证 CFD Helical intake port Three-Dimensional numerical simulation Steady flow test rig Experimental validation
分类号 TK402 [动力工程及工程热物理—动力机械及工程]
  • 相关文献

参考文献4

二级参考文献4

  • 1[1]Stone C R et al.The Measurement and Analysis of Swirl in Steady Flow.SAE 921642
  • 2Desmond E,Winterbone,Richard J.Pearson.Design Techniques for Engine Manifolds:Wave Action methods for IC Engines[M].London: Professional and Engineering Pub.Limited,1999.
  • 3Wenyu Pan,Yingjin Cui,James H.Leylek.ACFD Study of Losses in a Straight-Six Diesel Engine[C].SAE paper,1999(1):230.
  • 4Sinha N,Cavallo P A,Lee R A,et al. Novel CFD Techniques for In-Cylinder Flows on Tetrahedral Grids[C].SAE paper,980138.

共引文献26

同被引文献27

  • 1赵宏林,冯涛,侯细林.汽车发动机零件的快速制造[J].制造技术与机床,2005(7):24-26. 被引量：8
  • 2Alain B,Fischer A.New trends in rapid product development[J].Annals of the CIRP,2002,51(2):643～644.
  • 3Huang M C,Tai C C.The pre-processing of data points for curve fitting in reverse engineering[J].International Journal of Advanced Manufacturing Technology,2000,16(9):635～642.
  • 4Lee K H,Woo H,Suk T.Data reduction methods for reverse engineering[J].International Journal of Advanced Manufacturing Technology,2001,17(9):735～743.
  • 5Seo J,Lee H C,Park S.Reconstruction of a composite surface by reverse engineering thchniques[J].International Journal of Advanced Manufacturing Technology,2001,17(9):639～643.
  • 6EI Tahry S.Application of a Reynolds stress model to engine like flow calculations[J].Transactions of ASME,1985,107:19～24.
  • 7Jasak H,Echtle H,Wierse M.Rapid CFD simulation of internal combustion engines[J].SAE Trans.,1999,108(3):1 694～1 703.
  • 8Pal P.An easy rapid prototyping technique with point cloud data[J].Rapid Prototyping Journal,2001,7(2):82～89.
  • 9Chen Y H,Ng C T.Integrated reverse engineering and rapid prototyping computer-aided[J].Engng.,1997,33(3):481～484.
  • 10Bernard A,Fischer A.New trends in rapid product development[J].Annals of the CIRP,2002,51(2)

引证文献5

二级引证文献9

装备制造技术
2005年 第2期

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部