摘要
研究了Ａｌ／Ｃｕ的复合工艺参数对轧后结合强度和剥离面形貌的影响，提出了Ａｌ／Ｃｕ复合过程的３种结合机制，即三阶段模式：铝、铜新鲜表面的物理接触阶段，接触表面的激活阶段，扩散阶段，这为改进工艺提供了重要依据。
The effect of Al/Cu clad technological parameters on their bonding strength after rollingand the mophology of the peeled surface were investigated.Three bonding mechanisms,namely,three step models,in Al/Cu clad process were proposed:(1)the physical contact step of fresh surface of Al/Cu;(2)the activation step of contact surface (3)the diffusion step.It provides an important basis for improvement of the technique.
出处
《中南工业大学学报》
CSCD
1995年第4期509-513,共5页
Journal of Central South University of Technology(Natural Science)
基金
湖南省科委
关键词
轧制
复合板
结合机制
铝
铜
rolling
Al/Cu clad sheet
rolling bonding
bonding mechanism
