摘要
采用变温相似材料模拟夹层抗剪强度的变化,在普定拱坝试验中取得了满意的结果。变温材料由两层厚度小于0.1mm的紫铜箔中间涂黄油和惰性材料混合物,再掺入耐高温、高压的圆粒状高分子材料制成。在夹层下盘岩体上铺电热丝。当电热丝通电升温后,随着温度升高,使抗剪强度逐渐降低,以模拟实际夹层受地下水等侵蚀后抗剪强度的降低。文中还对有关技术问题进行了分析。
In this paper, the application of poikilothermic-similar material in structural model test of the Puding RCC arch dam is introduced,and the analysis of relative technical problem. This meterial is very effec-tive used in model test.
出处
《水电站设计》
1995年第2期63-67,共5页
Design of Hydroelectric Power Station
关键词
变温相似材料
结构模型试验
抗剪强度
similar.material ,structural model test,simulation ,shear strength.