超临界锅炉用9％～12％铬含钨铁素体钢管的发展
被引量：1
摘要
该文对近年国外开发的用于超临界锅炉的９％～１２％铬含钨铁素体钢管进行了详细阐述，并对这些钢种的力学性能和焊接性能作较全面的介绍．
出处
《发电设备》
1995年第9期2-6,共5页
Power Equipment
同被引文献12
-
1Sakuma T,Yagi K. Creep and fracture of engineering materials and structures[A].Tsukuba,1999.395-398.
-
2Kadoya Y,Dyson B F,MacLean M. Effect of welding and aging on properties of new 9-12％ steels[A].Jülich,1998.363.
-
3Eggeler G. The effect of long-term creep on particle coarsening in tempered martensite ferritic steels[J].{H}ACTA METALLURGICA,1989,(12):3225-3234.
-
4Komai N,Masuyama F. 10-year experience with T23 (2.25Cr-1.6W) and T122 (12Cr-0.4Mo-2W) in a power boiler[J].Journal of Pressure Vessel Technology,2005,(5):191-196.
-
5Masuyama F,Komai N,Yokoyama T. 3-Year experience with 2.25 Cr-1.6 W (HCM2S) and 12Cr-0.4 Mo-2W (HCM12A) steel tubes in a power boiler[J].JSME International Journal Series B Fluids and Thermal Engineering,1998,(4):1098-1104.
-
6Yoshizawa M,Igarashi M,Moriguchi K. Effect of precipitates on long-term creep deformation properties of P92 and P122 type advanced ferritic steels for USC power plants[J].{H}MATERIALS SCIENCE & ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING,2009.162-168.
-
7Miyata K,Igarashi M,Sawaragi Y. Effect of trace elements on creep prcoperties of 0.06C 2.25Cr-1.6W-0.1Mo 0.25V 0.05Nb steel[J].{H}ISIJ International,1999.947-954.
-
8Miyata K,Sawaragi Y,Okada H. Microstructural evolution of a 12Cr-2W-Cu V-Nb steel during threeyear service exposure[J].{H}ISIJ International,2000,(11):1156-1163.
-
9Hald J. Metallography and alloy design in the COST 536 action[A].2006.917-930.
-
10张红军,周荣灿,于在松.P92钢时效过程中冲击性能和硬度变化的试验[J].动力工程学报,2010,30(7):550-553. 被引量：14
-
1孟卫疆,余跃江,郑坊平,崔雄华.高温过热器G102管内壁氧化皮剥落导致的爆管原因分析及对策[J].理化检验（物理分册）,2012,48(9):613-617. 被引量：4
-
2余力.锅炉管用高强度2.25Cr—1.6W—V—Nb钢（HCM2S）的开发[J].国外低合金钢（合金钢）,1995(15):143-147.
-
3伊势田敦,宋安居.高强度12Cr—1Mo—1W—V—Nb锅炉钢管开发[J].东方锅炉,1989(1):46-48.
-
4包文东,郑坊平,崔雄华,王飞.超临界锅炉末级过热器T91钢管爆管原因分析及预防措施[J].理化检验（物理分册）,2012,48(10):704-707. 被引量：7
-
5刘乐昕.铁素体钢和奥氏体钢在蒸汽锅炉中的高温破坏及防护[J].国外金属热处理,1999,20(2):43-45.
-
6芮福才.奥氏体不锈钢与铁素体钢的焊接性能分析研究[J].黑龙江电力,2002,24(4):270-272. 被引量：12
-
7张国光,沈红.低合金铁素体钢焊缝显微组织的分类简介[J].锅炉压力容器安全,1989,5(5):44-45.
-
8张显.超临界/超超临界锅炉选材用材[J].发电设备,2004,18(5):307-312. 被引量：24
-
9邱振生.新型换热器管子管板焊接工艺的研究[J].压力容器,2003,20(9):9-12. 被引量：8
-
10赵旺初.德国研发出可用于650℃超超临界机组用钢[J].东方汽轮机,2006(3):57-58.
