期刊文献+

自动化加工中刀具破损实时监控方法的研究 被引量:1

On-Line Monitoring Approach of Cutting Tool Fracture in Automatic Machining
下载PDF
导出
摘要 详细叙述了在自动化加工中用霍尔电流传感器和流体传递信号的新型声发射(AE)传感器,联合监测主轴电机电流和加工中的AE信号,综合判断刀具破损的原理、监控方案和实验结果.该系统可自动识别直径为0.6mm以上的钻头破损,面积大于0.2mm2的镗刀、铣刀破损,准确率达98%以上. A technique of detecting cutting fracture by simultaneous monitoring both the spindle motor motor and acoustic emission (AE) during the cutting process is reported.A holler current sensor and a new type of AE sensor which transmits the AE signal through the lubricant are used to catch the required signals. The comprehensive estimation principle of cutting tool fracture, monitoring plan, and experimental results are introduced. The drills breakage with diameter over 0.6mm and turning and milling cutters'crack with area over 0.2mm2 can be detected automatically by the system The rate of success in detection approaches 98% or higher.
出处 《北京理工大学学报》 EI CAS CSCD 1995年第3期294-298,共5页 Transactions of Beijing Institute of Technology
基金 国防科技预研基金
关键词 监视控制 声发射 在线监测 刀具破损 FMS monitoring control acoustic emission/on-line monitoring, cutting tool fracture
  • 相关文献

参考文献2

二级参考文献2

  • 1王祖荫,声发射技术基础,1990年
  • 2马大猷,声学手册,1983年

共引文献3

同被引文献8

引证文献1

二级引证文献2

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部