期刊文献+

Si,Cu,Mo对奥贝球铁组织和性能的影响 被引量:4

Effect of Si,Cu,Mo on Microstructure and Mechanical Properties of ADI
下载PDF
导出
摘要 本文研究了Si,Cu,Mo对奥-贝球铁残余奥氏体含量、冲击韧性以及断裂方式的作用,发现不同元素存在着明确而各不相同的影响规律,含Si量(2.7~3.0)%,Cu合金化程度较大;Mo合金化程度较小时,残余奥氏体量和冲击韧性较高,球铁呈韧性断裂。含Mo量较高时合金倾向于沿晶断裂,最后,结合等温淬火参数,本文给出了冲击韧性和抗拉强度的逐步回归数学模型。 The effects of Si,Cu,Mo on volume fraction of retained austenite, impact toughness andfracture mode of ADI were investigated;It was indicated that the effects of Si,Cu,Mo are legible anddifferent one another.When the content of Si is(2.7~3.0)%,and with higher content of cu and low-er content of Mo ,both the volume fraction of retained austenite and impact toughness of specimens arehigher and ductile fracrure is shown,If the Mo content is high,the specimens are prior to intergranalarfracture. Finally,the mathematical model of impact toughness and tensile strength by stepwise regres-sion was obtained.
作者 苏华钦 严密
出处 《东南大学学报(自然科学版)》 EI CAS CSCD 1995年第4期71-76,共6页 Journal of Southeast University:Natural Science Edition
基金 国家教委博士点基金
关键词 奥氏体 冲击韧性 球墨铸铁 贝氏体 抗拉强度 ADI austenite impact toughness
  • 相关文献

参考文献3

  • 1苏华钦,Proceeding of 1991 world conference on austempered ductile iron,1991年
  • 2严密,第三届青年材料科学研讨会论文集,1991年
  • 3严密,东南大学学报,1991年,21卷,6期,102页

同被引文献10

引证文献4

二级引证文献9

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部