摘要
研究了聚醚酯弹性体熔融纺丝工艺,分析了纺丝过程中温度、纺丝速度以及卷绕张力控制与普通聚酯的不同之处,为聚醚酯弹性纤维的工业化提供了可靠的实验数据。
出处
《纺织科学研究》
北大核心
1995年第1期36-39,共4页
Textile Science Research
同被引文献19
-
1李泽阳,刘森林,沈贵宏,等.一种改善了回弹性的聚醚酯弹性纤维:中国,CN1480570A[P],2004-03-10.
-
2宋晓芳,李光.聚醚酯弹性纤维的改性研究[J].合成技术及应用,2007,22(4):8-11. 被引量:2
-
3Richeson GC, Spruie|l JE. Preparation, structure, and properties of co- polyester-ether elastic filaments [J]. Journal of Applied Polymer Science, 1990, 41 (3-4): 845-875.
-
4Abhiraman AS, Kim YW, Wagener KB. Evolution of structure and properties in fiber formation from a thermoplastic polyester-polyether seg- mented copolymer [J]. Journal of Polymer Science Part B: Polymer Phys- ics, 1987, 25(1): 205-228.
-
5Stribeck N, Apostolov AA, Zachmann HG, et al. Small angle X-ray scattering of segmented block copolyetheresters during stretching [J]. In- tenmtional Jounml of Polymeric Materials, 1994, 25(3): 185-200.
-
6Fakirov S, Fakirov C, Fischer EW, et al. Reversible morphological changes in poly (ether ester) thermorplastic elastomers during deformanion as revealed by small-angle X-ray scattering[J]. Colloid and Polymer Sci-ence, 1993, 271(9): 811-823.
-
7Fakirov S, Fakirov C, Fischer EW, et al. Deformation behaviour of poly(ether ester) thermoplastic elastomers as revealed by small-angle X ray scattering [J]. Polymer, 1991, 32(7): 1 173-1 180.
-
8Stribeck N, Fakirov S, Apostolov AA, et al. Deformation behavior of PET, PBT and PBT-based thermoplastic elastomers as revealed by SAXS from synchrotron [J]. Macromolecular Chemistry and Physics, 2003, 204 (7): 1 000-1 013.
-
9Ran S, Fang D, Zong X, et al. Structural changes during defiwnmtion of Kevlar fibers via on-line synchrotron SAXS/WAXD techniques [J]. Polymer, 2001, 42(4):1 601-1 612.
-
10Che J, Locker CR, Lee S, et al. Plastic delormation of semicrystalline polyethylene by Xray scattering: Comparison with atomistic simulations [J]. Macromolecules, 2013, 46(13): 5 279-5 289.
引证文献2
-
1闫婷伟,于金超,张玉梅,王华平.不同纺丝速度下聚醚酯纤维结构与性能的关系[J].合成纤维,2016,45(4):5-10. 被引量:3
-
2刘森林,闫婷伟,南建举,于金超,张玉梅.不同软硬段含量的聚醚酯纤维结构与性能的关系[J].合成纤维,2017,46(11):1-5. 被引量:1
二级引证文献4
-
1宋长远,王魁,陈鹏,王煦漫,王瑄.不同细度UHMWPE纤维的结构与性能[J].合成纤维,2017,46(9):31-35. 被引量:1
-
2刘森林,闫婷伟,南建举,于金超,张玉梅.不同软硬段含量的聚醚酯纤维结构与性能的关系[J].合成纤维,2017,46(11):1-5. 被引量:1
-
3李秉玺,李刚.GO含量对聚酰亚胺纤维凝聚态结构稳定性的影响[J].汉江师范学院学报,2020,40(3):106-110.
-
4纪晓寰,孙宾,王鸣义.聚酯纤维在技术纺织品领域的应用现状及发展趋势(下)[J].纺织导报,2022(6):50-53.
-
1兰建武,陈军.聚醚酯弹性纤维纺丝流动性的研究[J].四川纺织科技,1999(1):1-4.
-
2王文科,赵元磊,周良,袁峰.弹性纤维的熔融纺丝技术[J].合成纤维工业,1999,22(3):38-41. 被引量:14
-
3钟淑芳,赵庆章,夏禾,金剑,杨宇.聚醚酯弹性纤维后处理工艺的研究(四)[J].纺织科学研究,1996,7(4):14-15. 被引量:2
-
4秦艳华,刘丽君,张大省.有机成核剂改善聚醚酯纤维弹性回复率的研究[J].合成纤维工业,2004,27(2):25-26. 被引量:4
-
5闫婷伟,于金超,张玉梅,王华平.不同纺丝速度下聚醚酯纤维结构与性能的关系[J].合成纤维,2016,45(4):5-10. 被引量:3
-
6宋晓芳,李光.聚醚酯弹性纤维的改性研究[J].合成技术及应用,2007,22(4):8-11. 被引量:2
-
7一种改善了回弹性的聚醚酯弹性纤维[J].合成纤维工业,2004,27(3):62-62.
-
8倪天民.专利摘登[J].聚酯工业,2004,17(5):74-75.
-
9周静宜,姜白燕,张大省,李燕立.聚醚酯弹性纤维老化与防老化[J].中国纤检,2001(4):15-18. 被引量:2
-
10兰建武,吴大诚,杨大令,蹇锡高.热定型对嵌段聚醚酯弹性纤维结构与性能的影响[J].合成纤维工业,2002,25(1):12-15. 被引量:9