期刊文献+

碳氮化钛粒度与熔渣粘度关系的研究 被引量:16

AN INVESTIGATION OF THE RELATIONSHIP BETWEEN THE PARTICLE SIZE OF TITANIUM CARBONITRIDE AND THE VISCOSITY OF BLAST FURNACE SLAG BEARING HIGH RITANIA
下载PDF
导出
摘要 讨论了高钛型高炉渣中TiC,TIN颗粒的粒度对其粘度的影响;在实验室测定了不同粒度的TiC,TiN在不同配加量(0~8%)下的高钛型高炉渣粘度和熔化性温度。用图像分析仪对TiC和TiN在渣样中的分散形态进行了分析,实验结果表明:在实验范围内,随TiC,TiN配加量增加,炉渣粘度增加;配加量相同时,无论是TiC还是TIN,细粒度较粗粒度对炉渣变稠作用更为明显;粒度接近且配加量相同时,TiC较TiN的变稠作用明显。 n this paper the effect of particle size of TiC and TIN in high titania blast furnace slag on the viscosity of this type slag is discussed.The viscosity and melting termperature of the slag samples having dlfferent amount and size of TiC and TiN particle are measrued in the laboratory.Also the dispering pattern of TiC and TiN in slag samples has been analyzed by an image analysis device,The results show that the viscosity of the slags will increase with the increase of the amount of TiC and TiN added in the range of 0~8%. When the same amount of either TiC or TiN added,the smaller the particle size is,the thicker the slag is. But TiC has more effect on the slag viscosity than TiN when their amount in slag is equal and their particle sizes are approximate.
机构地区 重庆大学
出处 《钢铁钒钛》 CAS 北大核心 1995年第3期6-9,共4页 Iron Steel Vanadium Titanium
关键词 钛渣 粘度 高炉 炼铁 粒度 TiO_2 bearing slag,viscosity,blast funace ironmaking
  • 相关文献

参考文献6

  • 1白晨光,裴鹤年.高钛型高炉渣涨泡性能的研究[J].四川冶金,1991,13(2):8-12. 被引量:5
  • 2裴鹤年,白晨光,周培土.高钛型高炉渣泡沫化机制探讨[J].钢铁,1989,24(12):7-12. 被引量:10
  • 3谢冬生,毛裕文,郭昭信,朱元凯.高炉钛渣高温还原变粘规律[J]钢铁钒钛,1985(06).
  • 4齐宝铭.液态高炉钛渣的结构与特性的关系[J]钢铁钒钛,1984(01).
  • 5朱元凯,毛裕文,郭昭信,王功厚,董亚隆.含钛高炉渣泡沫稳定性的研究[J]钢铁钒钛,1983(01).
  • 6徐采栋,林蓉.攀枝花钒钛磁铁矿高温还原中的重要物理化学问题[J]钢铁钒钛,1980(Z1).

二级参考文献6

  • 1潘竟业,四川冶金,1986年,1期,16页
  • 2顾惕人,表面的物理化学,1985年
  • 3陈宗淇,胶体化学,1984年
  • 4王喜庆,四川冶金,1982年,3期,1页
  • 5曹质,钢铁钒钛,1981年,2期,30页
  • 6团体著者,乳状液理论与实践,1978年

共引文献11

同被引文献108

引证文献16

二级引证文献57

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部