期刊文献+

化学镀Ni-P合金涂层及其耐磨性

ELECTROLESS Ni-P ALLOY PLATINGS AND THEIR WEAR RESISTANCE
下载PDF
导出
摘要 对化学镀 Ni- P的硬度和耐磨性的关系进行了研究。低温长时加热可以获得高硬度 ,继续保温后其值不变。高温加热硬度达最大硬度以后保温硬度降低。不同温度处理其最大值相同 ,但耐磨性不同 ,高温处理优于低温处理。 The relationship of hardness and wear resistance of electroless Ni P alloy plating was studied. High hardness of plating could be obtained at low temperature for a long term, and was not changed after attained maximum. Hardness was decreased after maximum by high temperature heating. The maximum hardness was the same attained by heat treatment at different temperatures, the wear resistance was different, however,so it was better treated at higher tmeperatures. X ray photoelectron spectroscopic analysis showed that the phosphorus content on the surface was much more than that at the substrate of Ni P plating.
出处 《航空学报》 EI CAS CSCD 北大核心 1995年第6期671-675,共5页 Acta Aeronautica et Astronautica Sinica
基金 中关村测试基金资助课题
关键词 化学镀 硬度 耐磨损性 镍-磷合金 chemistry plating,hardness,wear resistance.
  • 相关文献

参考文献5

  • 1杨德钧,全国首届化学镀会议论文集,1992年
  • 2翟金坤,全国首届化学镀会议论文集,1992年
  • 3臧鑫士,北京航空航天大学学报,1989年,5期,125页
  • 4梁金忠,物理学报,1984年,33卷,7期,1037页
  • 5郭贻诚,非晶态物理学,1984年

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部