期刊文献+

高速双圆弧齿轮的动载荷试验研究

EXPERIMENTAL STUDY OF DYNAMIC LOAD OF HIGH SPEED HELICAL GEARS WITH DOUBLE-CIRCULAR-ARC TOOTH PROFILE
下载PDF
导出
摘要 用微型电阻应变片测试了高速双圆弧齿轮的齿根动态应力,并测得两组参数的双圆弧齿轮的动载系数。探索了一些高速齿轮齿根动态应力的测试方法及规律。发现在相同条件下,动载系数将随着载荷的增加而下降,当转速低于共振转速时,动载系数随着转速的增加而增大,当转速超过共振转速时,动载系数将随着转速的增加而减小。 The dynamic root stress of high speed helical gears with double-circle-arctooth Profile and the dynamic factor of two groups of those gears are measured by micro strain gauges. The measured method and regular Pattetn of the dynamic stress were gained from this experimental study.It is found, in the same conditions,the dynamic factor will decrease with load increasing,will increase with rotation rate increasing, when rotation rate lesses resonance rotation rate, and will decrease with rotation rate increasing when rotation rate exceed its resonance rate.
机构地区 哈尔滨工业大学
出处 《机械工程学报》 EI CAS CSCD 北大核心 1995年第5期71-75,共5页 Journal of Mechanical Engineering
基金 高等学校博士点基金
关键词 圆弧齿轮 动载荷 齿根应力 W-N gears Dynamic load Root stress of gear tooth
  • 相关文献

参考文献2

共引文献1

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部