期刊文献+

气流一元流动特性的理论分析与数值模拟

Theoretic Analysis and Digital Simulation of Gas Unitary Flow Characteristics
下载PDF
导出
摘要 基于气体动力学原理,由数学模型得出气流一元流动的特性:流速与压力的关系、流速与断面的关系,并分析说明原因。然后根据理论用软件进行数值模拟,结果与理论相符合。 Based on theory of gas dynamics, the paper gets gas unitary flow characteristics from maths model and analyzes the cause. The characteristics include the relation of gas velocity, pressure and cross section. According to analysis, digital simulation is made by software. The results are identical with the theories.
出处 《内燃机》 2005年第4期24-26,共3页 Internal Combustion Engines
关键词 亚音速流动 超音速流动 马赫数 数值模拟 subsonic flow supersonic flow Mach number numerical simulation
  • 相关文献

参考文献4

二级参考文献10

  • 1[1]Bayt R.Analysis,fabrication and testing of a MEMS-based micropropulsion system[D].Massachusetts Institute of Technology,1999.
  • 2[2]Byat R and Breuer K.Fabrication and testing of micron-sized cold gas thrusters[C].Micropropulsion of small spacecraft,Advances in Aeronautics and Astroautics,eds.M.Micci and A.Ketsdever,AIAA-2000 Press,187.
  • 3[3]Gulcainski F,Dulligan M and Lake J P.a.G.S.Micropropulsion research at AFRL [C].AIAA-2000- 3255.
  • 4[4]Grisnik T,Smith S and Saltz L.Experimental study of low Reynolds number nozzles[C].AIAA 87-0992.
  • 5[5]Hulsenberg D,Bruntsch R,Schmidt K and Reinhold F.Mikromechanische Bearbeitung von gotoempfindlichem Glas [J].Silikattechnik,1990,41:364.
  • 6[6]Bayt R.and Breuer K S.Viscous effects in supersonic MEMS fabricated micronozzles[A].Proceedings of the 3rd ASME Microfluids Symposium,Anaheim,CA,1998
  • 7[7]Markelov G and Ivanov,M.Numerical study of 2D/3D micronozzle flows[A].In Rarefied Gas Dynamics,eds.T.J.Bartel and M.Galiss,volume AIP,Melville,2001.
  • 8[9]Janson S W,Helvajian H and Bruer K S.MEMS,Microengineering and aerospace systems [C].AIAA 99-3802.
  • 9孔珑.工程流体力学(第二版)[M].山东:山东工业大学中国电力出版社,1992.
  • 10庞鹿鸣,汪孟乐,冯海仙.工程热力学(第二版)[M].高等教育出版社,1986.

共引文献18

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部