期刊文献+

二维编织层压板湿热环境下冲击后压缩性能的实验研究 被引量:14

Experimental Studies of CAI of Woven-fiber Laminates Composite on Hygrothermal Environment
下载PDF
导出
摘要 实验研究了二维编织环氧树脂基玻璃纤维复合材料层压板在室温和湿热条件下的冲击后压缩性能。结果表明,该体系复合材料平衡吸湿量平均达到2.2%。吸湿过程中材料性能发生退化,退化程度与试件厚度有关。材料达到平衡吸湿后,室温环境下的冲击能量平均下降19.2%。摄氏70℃,相对湿度85%环境下,冲击后压缩破坏应力平均下降54.3%。 Compress after impact ( CAI) of glass-fiber woven reinforcement epoxy laminates was investigated experimentally at room temperature and hygrothermal environment. The results of experimentation indicated that balanced moisture content of this composites was up to 2.2%, and property egradation which depended on specimen thickness took place during moisture absorption .after composites obtained balanced moisture content. average impacted energy decreased by 19.2%, and average ultimate failure stress of CAI decreased by 54.3% at 70℃ with 85% relative humidity.
出处 《航空材料学报》 EI CAS CSCD 2005年第4期40-44,共5页 Journal of Aeronautical Materials
基金 航空基金(04B53013)
关键词 复合材料 二维编织 湿热 冲击后压缩 composites woven hygrothermal CAI
  • 相关文献

参考文献5

二级参考文献13

  • 1姚康德,刘静.高性能环氧树脂的进展[J].热固性树脂,1992,7(3):52-57. 被引量:16
  • 2李善君,陈月辉.环氧树脂固化的吸湿过程及其影响因素[J].热固性树脂,1992,7(4):38-43. 被引量:5
  • 3张彦中,宁荣昌.CFRP层板的落重冲击分层损伤研究[J].航空材料学报,1996,16(2):57-62. 被引量:8
  • 4郑海燕.编织型复合材料低速冲击和冲击后压缩特性研究-试验及数值分析[M].西安:西北工业大学,2002,3..
  • 5张子龙 程小全 等.麦征复合材料冲击损伤及冲击损伤后压缩强度的一种等效方法.复合材料的现状和发展[M].合肥:中国科技大学出版社,2000,10.556-561.
  • 6Ilcewicz L B, Dost E F, Coggeshall R L. A model for compression after impact strength evaluation[A]. Proc of 21st International SAMPE Technical Conference[C]. 1989. 130-140.
  • 7Poe C C Jr. Demonstrating damage tolerance of composite airframes[R]. N94-29623, 1994.
  • 8Dost E F, Avery W B,Finn L B, Ilcewicz, L B, Scholz, D B, Wishart, R E. Impact damage resistance of composite fuselage structure [A]. Part 3. Fourth ACT Conference[C], 1993.
  • 9Yah Y. Analysis of impact threshold energy for fibre and fabric reinforced composites [J]. Journal of Reinforced Plastics and Composites, 1998, 17(12): 1056-1075.
  • 10Poe C C Jr. Mechanics methodology for textile preform composite materials [A]. Proc. of the 28^th International Technical Conference, SAMPE[C], 1996, 324-338.

共引文献54

同被引文献173

引证文献14

二级引证文献65

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部