期刊文献+

新型电极丝恒张力控制系统的研究

The Research of New Control System On Constant Wire Tension
下载PDF
导出
摘要 在高速走丝线切割机上,储丝筒正反向循环时放电区电极丝张力是否一致,直接影响 线切割机的加工质量。为此,研究了一种新型电极丝恒张力控制系统,能够很好地解决电极丝 张力的测量和储丝筒正反向循环时放电区电极丝张力一致的控制问题。 The vniformity of wire tension in forward and reverse loop discharge directly affects the proassing guality HS-WEDM when wire winding drum moves in circles. In this paper, a new control system on constant wire tension is studied. It can measure wire tension and guarantee uniformity of wire tension when wire winding drun moves in forward and reverse loop.
作者 董广强
出处 《新技术新工艺》 2005年第8期34-36,共3页 New Technology & New Process
关键词 高速线切割机 张力 控制系统 HS-WEDM, tensile force, control system
  • 相关文献

参考文献5

二级参考文献14

  • 1刘志东.快速走丝线切割机多次切割本质特性及可行性研究[J].电加工,1990(5):10-15. 被引量:12
  • 2Arunachalam C, Aulia M, Bozkurt B, et al. Wire vibration,bowing and breakage in wire EDM. 12th International Symposium for Electromachining ( ISEM - 12), 1998:109-118.
  • 3Kunieda M, Takeshita S, Okumiya K. Study on wire electrode temperature in WEDM. 12th International Symposium for Eiectromachining ( ISEM - 12), 1998: 119 ~ 128.
  • 4Rajurkar K P,Wang-W M. On-line monitor and coatnd for wire breakiage in WEDM. Annals of CIRP, 1991:219-222.
  • 5Spur G, Schonbeck J. Anode erosion in wire-EDM-A theoretical model. Annals of CIRP, 1993 : 253- 256.
  • 6Aulia M, Bozkurt B, Eubank P T. Thermal analysis of EDM wire process. 12th International Symposium for Eiectromachining( ISEM - 12), 1998 : 129- 138.
  • 7Jennes M, Dekeyser W, Snoeys R. Comparison of various approaches to model the thermal load on the EDM-wire electrode .Annals of CIRP, 1984:93-98.
  • 8宁光昌.线切割电极丝定位限幅器[J]机床,1988(03).
  • 9郭烈恩,刘正埙,邢晓峰,周大农,曹跃忠.高速走丝线切割机多次切割加工电极丝动态性能的研究[J].电加工,1999(6):22-25. 被引量:6
  • 10杨文峰.低速走丝线切割加工的断丝分析与处理[J].电加工与模具,2001(2):46-47. 被引量:1

共引文献27

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部