期刊文献+

双相TiAl基合金的高温孪生变形机制

Mechanical Twinning Behavior of High Temperaturefor Two Phase TiAl-based Alloy
原文传递
导出
摘要 研究了Ti-48Al双相合全在600、800℃下以不同压缩量(2%、8%、15%、20%)变形后的微观组织结构。试验结果表明,在高温下形变孪生同样是双相TiAl合金的重要变形机制,孪生系统为{111}<112].在高温下变形时,随着变形量的增加,不仅形变孪晶的数量增多,同时孪晶厚度显著增大。 In this papor the micrcotructure of Ti-48at%Al alloy deformed by compressionat 600℃ and 800℃ is studied. The compraseion strain is about 2%, 8%, 15%and20%. The result shows that mechanieal twinning plays an important role in deformation fortwo phase TiAl alloy. The twinning system is found to be {lll}<112]. The quantity ofmeehanical twins increases with deformation increasing and the mechanical twins can bedevelopod very thick at elevated temporature.
机构地区 太原工业大学
出处 《金属热处理学报》 CSCD 1995年第4期1-5,11,共6页
基金 山西省青年科学基金资助项目
关键词 TIAL 金属间化合物 形变孪生 变形 TiAl alloy, mechanical twinning, intermetallic compound
  • 相关文献

参考文献2

  • 1梁伟,金属热处理学报,1995年,16卷,3期,14页
  • 2Zhe Jin,Scripta Metall Mater,1992年,27卷,1301页

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部