摘要
进口汽车的曲轴价格昂贵,磨损后在没有配件的情况下可采用电刷镀技术来修复。对于进口汽车来说,产生曲轴磨损的主要原因是:用户对进口汽车的维修使用要求不够了解,添加润滑油时降低了标准,油道被堵塞,轴瓦缺油而被烧伤磨损轴颈;或维修时未按装配要求操作,使曲轴各道轴颈松紧程度不均,装配过紧处,使曲轴润滑油膜太薄,或无法形成油膜,造成烧伤磨损。在电刷镀时,只要正确执行刷镀工艺就可将曲轴修复。
Since a spare part of crankshaft of an imported motor vehicle is very expensive, a worn crankshaft can be rehabilitated by brush-plating if there is no spare part. The main reasons caused crankshaft wear of imported vehicles are:the users do not clearly understand the requirements in maintenance and operation of imported motor vehiclesi filling-in Poor quality oil into the engine,causing engine oil passage being clogged, sothat crankshaft bearings have no oil and journals burn out or wear off; crankshaft is improperly assembled during maintenance and repair,bearing caps are fastened with different torqus, so that each bearing can not keep a normal oil film, etc. A worn crankshaft can be rehabilitated well as long as the beush-plating process is performed properly.
出处
《汽车技术》
北大核心
1995年第2期48-50,共3页
Automobile Technology