摘要
钴包碳化钨复合粉研制初探何芬,胡永海(北京有色金属研究总院100088)关键词:钴包碳化钨粉近年来,人们对复合粉的应用受到越来越多的重视。钴包碳化钨复合粉就是典型的一例 ̄[1~3]。由于金属钴的特殊保护作用,这种包覆钴的碳化钨与目前工业上大量使用的机...
出处
《稀有金属》
EI
CAS
CSCD
北大核心
1995年第5期398-400,共3页
Chinese Journal of Rare Metals
同被引文献21
-
1Takeshima Eiki et al.靶的运动机构[P].JP Pat:05194064.1993—08—06.
-
2Vossen J L et al.薄膜加工工艺[M].北京:机械工业出版社,1987..
-
3Hojo Junichi.Preparation of metal-coated ceramics particles by agglomeration coating technique[J]. Journal of the Japan Society, of Powder and Powder Metallurgy, 1989, 36(4):411.
-
4Hojo Junichi, et al. Metal and carbide coatings of ceramics particles using chemical plating techniques[J] .Journal of the Japan Society of Powder and Powder Metallurgy, 1993, 40 (12):1 185.
-
5Hzjdu J, et al.The future of electroless nickel[J] .Metal Finishing, 2002, (5) :42.
-
6Lee Y F. et al, Effect of SiCp reinforcement by eletroless copper plating on properties of Cu/SiCp composites[ J] .Powder Metall,1999, 42(2) : 147.
-
7Hu W, et al. Graded coatings prepared by plasma spraying with Ni-coated ZrO2 powders[J] .Surface & Coatings Technology,1998, 105(1-2) :102.
-
8Kang B S, et al. Preparation of nickel - coated alumina composite powder by an aqueous - phase reduction process [J].Journal of Materials Science, 1995,30(15) :3 883.
-
9Sift X.Metallization of piezoelectric ceramic surface[J ]. Plating and Surface Finishing, 1997, 84 (3) : 63.
-
10Lee W Y, et al. Synthesis of functionally graded metal - ceramics microstructure by CVD[J] .Journal of Materials Research, 1995, 10(12):3 000.
二级引证文献2
-
1彭倩,邱绍宇,武兵书,郑学斌,张东博,姜超.碳化硼涂层材料研究进展[J].金属热处理,2005,30(10):7-13. 被引量:9
-
2刘猛,李顺,白书欣,赵恂,熊德赣.SiC_p/Cu电子封装材料研究进展[J].材料导报,2013,27(19):130-134. 被引量:9
-
1陶正已.近十年来钨粉和碳化钨粉的研究和开发[J].硬质合金,1992,9(2):65-75. 被引量:16
-
2黄忠耿.研制和生产粒度小于0.6μm碳化钨粉的工艺技术发展动态[J].稀有金属与硬质合金,1998,26(4):51-56. 被引量:8
-
3王洪标,赵秦生,陈绍依.碳化钨粉粒度的数字模型[J].江苏冶金,1990,18(5):14-16.
-
4碳化钨粉制备技术[J].科技开发动态,2004(6):50-51.
-
5邹序枚.WC粉分级及用分级WC制造硬质合金的研究[J].稀有金属与硬质合金,1993,21(2):22-25. 被引量:4
-
6李冰心.碳化钨一周上涨19000元/吨[J].中国金属通报,2010(18):7-7.