摘要
采用超声C扫描、显微镜分析及图像分析软件对层压板的孔隙含量、分布、形状及尺寸进行了定量表征,分析了孔隙率对纵向拉伸强度、压缩强度和层间剪切强度的影响规律。结果表明,铺层方式影响孔隙的分布;对于两种铺层形式的层压板,孔隙等效直径和纵横比都随孔隙率的增加而增加;随着固化压力的不断减小,孔隙率不断增大,层间剪切强度、纵向拉伸强度和压缩强度不断下降,且铺层方式影响纵向拉伸模量变化。
Quantitative characterization of void content,distribution,shape,size of the laminates was obtained by ultrasonic C-scan,microscopic inspection and image analysis software.The effects rule of porosity on interlaminar shear strength(ILSS),longitude tensile strength and compress strength was discussed.The results show that the laminate lay up type affects the void distribution;equivalent diameter and aspect ratio increase with the increasing porosity;porosity,interlaminar shear strength(ILSS),longitude tensil...
出处
《玻璃钢／复合材料》
CAS
CSCD
2011年第1期24-28,共5页
Fiber Reinforced Plastics/Composites
关键词
碳纤维
复合材料
孔隙率
形貌
力学性能
carbon fiber
composites
porosity
morphology
mechanical property
