期刊文献+

用于煤粉点火的电弧等离子体发生器性能研究

Characteristics research on an arc plasma torch for igniting coal powder
下载PDF
导出
摘要 介绍了一种用于电站锅炉煤粉点火的等离子体发生器,实验研究了发生器电弧的电压特性,对等离子体发生器的工作气压范围进行了性能评估,并得出了气压与电弧电压的对应曲线,利用焓探针测量了发生器出口轴线方向的温度分布.实验结果表明:此等离子体点火器的工作稳定可靠,工作气压范围广,发生器出口50mm处轴线温度超过3300K,有效点火长度可以达到500mm,有利于点燃煤粉. A plasma generator for igniting coal powder in a power plant boiler was introduced.Experiments have been done to study the arc voltage characteristics.The working air pressure range of the generator has been evaluated and the curve of pressure against arc voltage has been obtained.Moreover,enthalpy probe has been used to measure the temperature distribution along the exit axis of the generator.The results show that this plasma ignitor works stably and reliably,with a wide range of working pressure. The temperature at 50mm from the exit exceeds 3 300K,and the effective ignition length reaches 500 mm,very favorable conditions for coal ignition.
出处 《中国科学技术大学学报》 CAS CSCD 北大核心 2010年第12期1301-1304,共4页 JUSTC
基金 国家自然科学基金(50876101 10675122)资助
关键词 煤粉点火 等离子体发生器 电弧电压 等离子体射流 coal powder ignition plasma generator arc voltage plasma jet
  • 相关文献

参考文献6

二级参考文献4

  • 1涂建华.煤粉炉的无油点火技术[J].中国能源,1996,18(11):38-40. 被引量:5
  • 2陈以理.火力发电厂锅炉直接点燃煤粉的概况[J].动力工程,1985,(6).
  • 3戚隆溪,气动力学杂志,1985年,2期,80页
  • 4戚隆溪,气动实验与测量控制,1981年,3期,25页

共引文献9

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部