期刊文献+
任意字段
题名或关键词
题名
关键词
文摘
作者
第一作者
机构
刊名
分类号
参考文献
作者简介
基金资助
栏目信息

拼焊板成形时焊缝移动及控制方法分析 被引量：3

Analysis of Weld Line Movement in Forming of Tailor Welded Blanks and Control Method
下载PDF
导出
摘要 焊缝移动是降低拼焊板(简称TW B)的成形性的一个重要因素。本文就拼焊板成形时焊缝移动的特点和原因做了分析。分别介绍了压边力法、拉延筋法和焊缝约束法三种控制焊缝移动的方法,并提出了今后有待研究的内容。 The reason and the characteristics of weld line movement have been analyzed,with introduction to three control method such as BHF method, draw bead method and weld line restraining method and the relevant issues needed to be further studied.
作者 刘明洋 汪建敏 姜银方 朱元佑 武立波
机构地区 江苏大学材料学院 江苏大学机械工程学院 南京工程学院机械工程系
出处 《锻压装备与制造技术》 2005年第4期118-121,共4页 China Metalforming Equipment & Manufacturing Technology
基金 江苏省自然科学基金资助项目(BK2002009) 国家科学基金资助项目(50415125)
关键词 机械制造 焊缝移动 拼焊板 冲压 控制方法 Tailor-welded blanks Weld line movement Weld line restraining method BHF method Draw bead method
分类号 TG386 [金属学及工艺—金属压力加工]
  • 相关文献

参考文献12

  • 1张士宏,许沂,马占国,王忠堂,程欣.拼焊板方盒件拉深成形的实验研究[J].塑性工程学报,2000,7(3):22-25. 被引量：15
  • 2Ahmetoglu,M.A.,D.Brouwers,L.Shulkin,et al. Deep Drawing of Round Cups from Tailor-welded Blanks.Journal of Material Processing Technology, 1995, ( 53 ) :684-94.
  • 3Si Junhe,Xin Wu,et al. Formability Enhancement for Tailor-Welded Blanks Using Blank Holding Force Control.Journal of Manufacturing Science and Engineering,2003, ( 125 ):461-467.
  • 4Brad Lee Kinsey,Jian Cao. An Analytical Model for Tailor Welded Blank Forming. Journal of Manufacturing Science and Engineering,2003, ( 125): 344-351.
  • 5王炳德,王忠堂,郑杰,张士宏.拼焊板方盒件拉延实验研究[J].沈阳工业学院学报,2002,21(3):80-83. 被引量：1
  • 6朱宝泉,马占国,张士宏,许沂.拼焊板方盒件拉深成形中焊缝移动规律的研究[J].锻压技术,2003,28(2):25-27. 被引量：9
  • 7Young Moo Heo, Youho Choi. Characteristics of weld line movements for the deep drawing with drawbeads of tailor-welded blanks.Journal of Materials Processing Technology, 2001, ( 111 ): 164-169.
  • 8Young Moo Heo, Sung Ho Wang. The effect of the drawbead dimensions on the weld-line movements in the deep drawing of tailorwelded blanks.Journal of Material Processing Technology,2001,(113):686-691.
  • 9Si Junhe.Formability enhancement for tailor-welded blanks. Dissertation Abstracts International, 62 ( 1 ) :492.
  • 10Levy, B.S.Development of a prediction model for drawbead restraining force utilizing work of Nice and Wang. Journal of applied metalworking, 1983,3 (1):38-45.

二级参考文献11

  • 1马占国.拼焊板方盒件拉深不均匀变形的数值模拟与控制,硕士学位论文[D].内蒙古工业大学,2001.
  • 2F I Sunders,R H Wagoner.Forming of Tailor--Welded Blanks.Metallurgical and Materials Transactions A,1996(9):2605～2616.
  • 3M F Shi,K M Picket.K Bhatt Formability Issues in the Application of Tailor-Welded Blank Sheets.In:SAE Paper 930278 Intemational Congress and Exposition,Detroit(USA),1993:1～5.
  • 4Min K B, Kim S, Kang S S. A study on resistance welding in steel sheets by tailor welded blank(1st Report)-Evahation of upset weldability and formability[J]. Journal of Materials Processing Technology, 2000,101 : 186-192.
  • 5Min K B, Kang S S. A study on resistance welding in steel sheets for tailor welded blank (2nd Report)-Evaluation of flash weldability and formability[J]. Journal of Materials Processing Technology, 2000,103 : 218- 224.
  • 6Saunders F I, Wagoner R H. The use of tailor-welded blanks in automotive a pllications[M]. Simulation of Materials Processing,Theory Methods and Applications, ISBN9054105534.
  • 7Meinders T, Van den Berg, Huetink J. Deep drawing simulations of tailored blanks and experimental verification[C]. Proceedings of SheMet, 98,235-246.
  • 8Bolt P J ,Bavel W B, Junai A A. Improving the formability of tailor-made blanks by using a counter force[C]. Proceedings of the 5th International Conference SheMet'97:463-469.
  • 9Ninforge D, Dawance J. Improvement of tailored blank stamping by using a control and localisation of the blank-holder[Z]IDDRG, 98.
  • 10张士宏,程欣,郎利辉,徐福昌.拼焊板焊接工艺及其对拼焊板塑性变形影响的试验研究[J].材料科学与工艺,1999,7(S1):143-147. 被引量：9

共引文献19

同被引文献9

引证文献3

二级引证文献3

锻压装备与制造技术
2005年 第4期

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部