期刊文献+

Synthesis of LiCo_xNi_(1-x)O_2 cathode materials from electrolysis Co-Ni alloys

Synthesis of LiCo_xNi_(1-x)O_2 cathode materials from electrolysis Co-Ni alloys
下载PDF
导出
摘要 The LiCoxNi1-xO2 (x=0.2, 0.5 and 0.8) cathode materials were synthesized by sintering the mixtures of lithium salt and CoxNi1-x(OH)2 (x=0.2, 0.5 and 0.8) which were achieved from corresponding CoxNi1-x alloys by electrolysis technique. The structure and electrochemical characteristics of the obtained LiCoxNi1-xO2 were studied by XRD, SEM, PSCA and charge-discharge cycling test. The results show that the electrochemical capacities of the LiCoxNi1-xO2 (x=0.2, 0.5 and 0.8) materials are improved with the increase of the Ni content. The electrochemical performance of LiCo0.2Ni0.8O2 made in oxygen atmosphere has higher charge-discharge capacity and better cycleability compared with the one made in air atmosphere. The LiCox Ni1-xO2 (x= 0.2, 0.5 and 0.8) cathode materials were synthesized by sintering the mixtures of lithium salt and Cox Ni1-x (OH)2 (x= 0.2, 0.5 and 0.8) which were achieved from corresponding Cox Ni1-x alloys by electrolysis technique. The structure and electrochemical characteristics of the obtained LiCoxNi1-xO2 were studied by XRD, SEM, PSCA and charge-discharge cycling test. The results show that the electrochemical capacities of the LiCoxNi1-xO2(x=0.2, 0.5 and 0.8) materials are improved with the increase of the Ni content. The electrochemical, performance of LiCo0.2 Ni0.8O2 made in oxygen atmosphere has higher charge-discharge capacity and better cycl.eabil.ity compared with the one made in air atmosphere.
出处 《中国有色金属学会会刊:英文版》 EI CSCD 2005年第4期784-788,共5页 Transactions of Nonferrous Metals Society of China
基金 Project (2002CB211800) supported by the National Key Fundmental Research and Development Programof China
关键词 LiCoxNi1-xO2 阴极 合成工艺 电解工艺 蓄电池 合金 cathode materials electrolysis LiCox Ni1-xO2 Co-Ni alloys
  • 相关文献

参考文献24

  • 1Scrosati B. Challenge of portable power[J]. Nature,1995, 373: 557- 558.
  • 2Koksbang R, Barker J, Shi H, et al. Cathode materials for lithium rocking chair batteries[J]. Solid State Ionics, 1996, 84:1-21.
  • 3Ohzuku T, Uedo A. Solid-state redox reactions of LiCoO2 (R3m) for four-volt secondary lithium cells[J]. J Electrochem Soc, 1994, 141:2972 - 2978.
  • 4Arai H, Okada S, Sakurai Y, et al. Reversibility of LiNiO2 cathode[J]. Solid State Ionics, 1997, 95:275- 282.
  • 5Ohzuku T, Uedo A, Nagayama M. Electrochemistry and structural chemistry of LiNiO2 (R3m) for 4 volt secondary lithium cells[J]. J Electrochem Soc, 1993,140:1862 - 1870.
  • 6Morales J, Pérez-Vicente C, Tirado J L. Cation distribution and chemical deintercalation of Li1-x Ni1+x O2[J]. Mat Res Bull, 1990, 25:623-630.
  • 7Moshtev R V, Zlatilova P, Manev V, et al. The LiNiO2 solid solution as a cathode material for rechargeable lithium batteries [J]. J Power Sources,1995, 54: 329-333.
  • 8Rougier A, Graviereau P, Delmas C. Optimization of the composition of the Li1-z Ni1+xO2 electrode materials: structural, magnetic, and electrochemical studies[J]. J Electrochem Soc, 1996, 143: 1168-1175.
  • 9Peres J P, Delmas C, Rougie A, et al. The relationship between the composition of lithium nickel oxide and the loss of reversibility during the first cycle[J]. J Phys Chem Solids, 1996, 57: 1057- 1060.
  • 10Biensan P, Simon B, Pérès J P, et al. On safety of lithium-ion cells[J]. J Power Sources, 1999, 82:906-912.

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部